In 2026, a failed exam costs money, time, and momentum. Putting 60 verified HP Building HP SDN and FlexNetwork Solutions practice questions between you and that risk is a straightforward, practical decision.
HP HP0-Y51 Exam Overview:
| Certification Vendor: | Hewlett Packard Enterprise (HPE) |
|---|---|
| Exam Name: | Building HP SDN and FlexNetwork Solutions |
| Exam Number: | HP0-Y51 |
| Passing Score: | 65% |
| Available Languages: | English |
| Related Certifications: | HPE ASE - FlexNetwork Integrator V1 HPE ASE - FlexNetwork Architect V2 |
| Real Exam Qty: | 60 |
| Exam Format: | Scenario-Based, Multiple Answer, Multiple Choice, Single Answer |
| Exam Price: | USD 150 - 200 |
| Certificate Validity Period: | 3 years |
| Exam Duration: | 115 minutes |
| Recommended Training: | HP Unified Wired-Wireless Networks and BYOD Building HP FlexFabric Data Centers Creating HP Software-Defined Networks |
| Exam Registration: | Pearson VUE Registration HPE Certification Portal |
| Sample Questions: | DOWNLOAD DEMO |
| Exam Way: | Proctored exam at Pearson VUE test centers or online via OnVUE |
| Pre Condition: | Hold HPE ASE - FlexNetwork Architect V2 or HPE ASE - FlexNetwork Integrator V1; or equivalent industry certification such as CCIE |
| Official Syllabus URL: | https://certification-learning.hpe.com/ |
HP HP0-Y51 Exam Syllabus Topics:
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Software-Defined Networking (SDN) Fundamentals | 30% | - SDN applications and use cases - OpenFlow protocol and operation - VAN SDN Controller deployment and management - SDN architecture and components |
| Topic 2: Network Management and Troubleshooting | 15% | - HPE IMC management platform - Troubleshooting SDN and FlexNetwork issues - Monitoring and diagnostics |
| Topic 3: Unified Wired-Wireless Networks and BYOD | 25% | - Guest access and QoS policies - Wireless controller and access point deployment - IMC and UAM authentication/access control - BYOD security and provisioning |
| Topic 4: FlexNetwork and FlexFabric Data Center Solutions | 30% | - EVI, TRILL, and SPB protocols - Multi-tenant and VPN services - Data center redundancy and high availability - FlexFabric architecture and technologies |
HP0-Y51 Exam Questions Answered
If you are purchasing for a company, take all three versions of HP Building HP SDN and FlexNetwork Solutions, since different employees study differently. If you are buying for yourself, pick the single version that matches your habits: the PDF for printing and writing on paper, the PC test engine for simulation tests with scored feedback, or the APP online engine for cross-platform use with offline support.
HP0-Y51 requires 65% to pass, and the official exam fee is USD 150 - 200. Remember that a retake means paying that fee again, which is why focused preparation matters.
The HP0-Y51 exam contains 60 questions within 115 minutes minutes. Rehearsing under the same limit on the PracticeVCE engine builds calm, automatic pacing.
IT certification exams are not cheap, and failing usually means paying the full fee a second time plus losing the hours you already invested. Serious preparation with HP Building HP SDN and FlexNetwork Solutions exists precisely to prevent that double cost: study the 60 verified questions well, and you give yourself a strong, realistic chance of passing the HP0-Y51 exam the first time.
Pearson VUE Registration: register for HP0-Y51
HPE Certification Portal: register for HP0-Y51
The package includes 60 practice questions for the HP0-Y51 exam, all with verified answers, in PDF, PC test engine, and APP online engine versions.
Hold HPE ASE - FlexNetwork Architect V2 or HPE ASE - FlexNetwork Integrator V1; or equivalent industry certification such as CCIE
- Network Management and Troubleshooting (15%)
- Software-Defined Networking (SDN) Fundamentals (30%)
- FlexNetwork and FlexFabric Data Center Solutions (30%)
Spend your hours where the weights are highest.
Creating HP Software-Defined Networks: Visit official page
Building HP FlexFabric Data Centers: Visit official page
HP Unified Wired-Wireless Networks and BYOD: Visit official page
HP Building HP SDN and FlexNetwork Solutions Sample Questions:
Refer to the exhibit.
The HP Comware switch places VLAN 2, which is associated with 10 1.2.0/24, in OpenFlow instance 1. The switch supports IP routing and is configure with the default gateway IP address in VLAN 2. An SDN application has created the flow entry shown in the exhibit to route traffic from 10.1.2.0/24 to 10.1.3.0/24.
The exhibit does not show the output interface for the flow. Which output interface supports the needs of this scenario?
- A. Any port that is a member of VLAN 2
- B. Normal
- C. Any port in the controller VLAN
- D. Controller
Correct Answer: D 🗳️
Refer to the exhibit.
A company has two HP Unified Wired-Wireless controllers. The MSM APs in Area 1 in the exhibit are controlled by Controller1. The MSM APs in Area 2 in the exhibit are controlled by Controlled. The company purchases a Controlled to provide backup for both Controller1 and Controller2 (N+1 redundancy).
How does the administrator set up the APs in Area 1 so that they contact Controlled if Controller1 fails?
- A. Create a roam group that includes Controller1, Controlled, and Controlled. Make sure that Controlled has the highest IP address
- B. On Controller1, configure the new controller's IP address as the backup controller for the APs
- C. Create a backup AC configuration group between Controller1 and Controlled. Enable Fast Backup on the group.
- D. Create AP templates for the area 1 APs on Controlled and set its connection priority for these APs to 7.
Correct Answer: A 🗳️
Refer to the exhibit.
A company has HP APs that are managed by the two Unified Wired-Wireless controllers. Wireless
users use Wi-Fi Protected access (WPA2) and authenticate with 802.1X to HP Access Manager (UAM). The SSID uses centralized forwarding. Users need to be able to roam seamlessly from area 1 to area 2.
Which step helps to meet these needs?
- A. Set up enable a roam that includes both controllers.
- B. Configure local forwarding for the SSID on both controllers.
- C. Change the security mode to preshared key (PSK) and enable opportunistic key change (also called "fast roaming").
- D. Configure controller 1 as a backup controller for APs in area; configure controller 2 as a backup controller for APs in area1.
Correct Answer: C 🗳️
A company has an HP BYOD solution. The administrator is setting up synchronization of user accounts from Active Directory (AD). The administrator wants User Access Manager (UAM) to organize the user accounts in groups in the same way that AD does.
How does the administrator configure this to accomplish the goal?
- A. Create every group before setting up the LDAP synchronization policy
- B. Install the UAM agent on the AD server, otherwise, UAM can only synchronize the highest-level group of domain users.
- C. In the LDAP Server policy, set the User Group setting to Synchronize by OU, which allows AD to create the groups automatically
- D. Establish the LDAP synchronization policy, and then create a user group policy to synchronize the groups and sort the user accounts
Correct Answer: C 🗳️
Table of Acronyms A company is deploying an HP VAN SDN Controller solution, which is installed with the HP Network Protector application. The administrator configures the solution to control HP Provision switches and must choose the OpenFlow instance failover mode. Which customer requirement should cause the administrator to choose standalone mode?
- A. It is vital to protect user connectivity if the controller fails, even if the network is temporarily less protected against malware
- B. The company requires N+2 redundancy for the VAN SDN Controller functionality and the malware protection.
- C. OpenFlow must be confined to the guest VLAN, which has the devices against which Network Protector guards the network
- D. The solution must work with a single VAN SDN Controller rather than a team of controllers.
Correct Answer: D 🗳️
Viewing page 1 out of 12 pages.
Viewing questions 1-5 out of 60 questions.
1328 Customer Reviews
