Verified & Correct 350-401 Practice Test Reliable Source Nov 13, 2025 Updated
Free Cisco 350-401 Exam Files Downloaded Instantly
To pass the Cisco 350-401 certification exam, candidates must demonstrate a deep understanding of the latest networking technologies and best practices. They must also have hands-on experience with Cisco enterprise networking solutions, such as Cisco routers, switches, firewalls, and wireless access points. 350-401 exam is part of the Cisco Certified Network Professional (CCNP) and Cisco Certified Specialist - Enterprise Core certifications, which are recognized worldwide as a standard of excellence in enterprise networking.
Cisco 350-401 ENCOR exam is a comprehensive exam that covers a wide range of topics related to enterprise network technologies. 350-401 exam includes questions on network architecture, virtualization, infrastructure, security, automation, and network assurance. 350-401 exam is designed to test the candidate's understanding of the latest networking technologies and how they can be used to build and troubleshoot enterprise networks.
NEW QUESTION # 83 

Answer:
Explanation:
See the solution below in Explanation.
Explanation:
R2
R3
NEW QUESTION # 84
Which function in handled by vManage in the cisco SD-WAN fabric?
- A. Performs remote software upgrades for WAN Edge. vSmart and vBond
- B. Distributes policies that govern data forwarding
- C. Establishes BFD sessions to test liveliness of links and nodes
- D. Establishes IPsec tunnels with nodes.
Answer: A
Explanation:
Explanation
We can remote upgrades WAN Edge, vSmart and vBond in vManage.
https://sdwan-docs.cisco.com/Product_Documentation/vManage_Help/Release_18.4/Maintenance/Software_Upg
NEW QUESTION # 85
Refer to the exhibit.
The IP SLA is configured in a router. An engineer must configure an EEM applet to shut down the interface and bring it back up when there is a problem with the IP SLA. Which configuration should the engineer use?
- A. event manager applet EEM_IP_SLA
event sla 10 state down - B. event manager applet EEM_IP_SLA
event sla 10 state unreachable - C. event manager applet EEM_IP_SLA
event track 10 state down - D. event manager applet EEM_IP_SLA
event track 10 state unreachable
Answer: C
Explanation:
The -ip sla 10 will ping the IP 192.168.10.20 every 3 seconds to make sure the connection is still up.
We can configure an EEM applet if there is any problem with this IP SLA via the command -event track 10 state down.
NEW QUESTION # 86
Which two namespaces does the LISP network architecture and protocol use? (Choose two.)
- A. EID
- B. DNS
- C. VTEP
- D. TLOC
- E. RLOC
Answer: A,E
Explanation:
Locator ID Separation Protocol (LISP) is a network architecture and protocol that implements the use of two namespaces instead of a single IP address: + Endpoint identifiers (EIDs)-assigned to end hosts. + Routing locators (RLOCs)-assigned to devices (primarily routers) that make up the global routing system.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_lisp/configuration/xe-3s/irl-xe-3s- book/irl-overview.html
NEW QUESTION # 87
Refer to the exhibit.
Which type of antenna does the radiation pattern represent?
- A. directional patch
- B. Yagi
- C. multidirectional
- D. omnidirectional
Answer: B
NEW QUESTION # 88
A system must validate access rights to all its resources and must not rely on a cached permission matrix. If the access level to a given resource is revoked but is not reflected in the permission matrix, the security is violated. Which term refers to this REST security design principle?
- A. complete mediation
- B. separation of privilege
- C. least common mechanism
- D. economy of mechanism
Answer: A
Explanation:
Explanation
A system should validate access rights to all its resources to ensure that they are allowed and should not rely on the cached permission matrix. If the access level to a given resource is being revoked, but that is not being reflected in the permission matrix, it would be violating security.
https://medium.com/strike-sh/rest-security-design-principles-434bd6ee57ea
NEW QUESTION # 89
Refer to the exhibit.
Which HTTP JSON response does the Python code output give?
- A. 7.61
- B. 7.0(3)|7(4)
- C. KeyError: 'kickstart_ver_str'
- D. NameError: name 'json' is not defined
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION # 90
Refer to the Exhibit.
Running the script causes the output in the exhibit. What should be the first line of the script?
- A. import manager
- B. from ncclient import *
- C. ncclient manager import
- D. from ncclient import manager
Answer: B
NEW QUESTION # 91 
Refer to the exhibit. A network administrator configured RSPAN to troubleshoot an issue between switch1 and switch2. The switches are connected using interface GigabitEthernet 1/1. An external packet capture device is connected is switch2 interface GigabitEthernet 1/2. Which two commands must be added to complete this configuration? (Choose two)
- A. Option C
- B. Option E
- C. Option B
- D. Option D
- E. Option A
Answer: B,E
NEW QUESTION # 92
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.
Answer:
Explanation:
Explanation
On premise: customizable,specific requirements,resources
Cloud: scale, built-in automated backup, strong stable internet
NEW QUESTION # 93
An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.

Answer:
Explanation:
Explanation
NEW QUESTION # 94
Refer to the exhibit.
R2 is the neighboring router of R1. R2 receives an advertisement for network 192 168.10.50/32. Which configuration should be applied for the subnet to be advertised with the original /24 netmask?
- A.

- B.

- C.

- D.

Answer: D
NEW QUESTION # 95
Which two protocols are used with YANG data models? (Choose two.)
- A. NFTCONF
- B. RESTCONF
- C. TLS
- D. SSH
- E. HTTPS
Answer: A,B
Explanation:
Explanation
YANG (Yet Another Next Generation) is a data modeling language for the definition of data sent over network management protocols such as the NETCONF and RESTCONF.
NEW QUESTION # 96
What is a characteristic of a WLC that is in master controller mode?
- A. Configuration on the master controller is executed on all wireless LAN controllers.
- B. All new APs that join the WLAN are assigned to the master controller.
- C. The master controller is responsible for load balancing all connecting clients to other controllers.
- D. All wireless LAN controllers are managed by the master controller.
Answer: B
Explanation:
Explanation
When should I use the master controller mode on a WLC? - When there is a master controller enabled, all newly added access points with no primary, secondary, or tertiary controllers assigned associate with the master controller on the same subnet.
NEW QUESTION # 97
Refer to the exhibit.
An engineer entered the command no spanning-tree bpduguard enable on interface Fa 1/0/7. What is the effect of this command on Fa 1/0/7?
- A. It remains in err-disabled state until the spanning-tree portfast bpduguard disable command is entered in the interface configuration mode.
- B. It remains in err-disabled state until the shutdown/no shutdown command is entered in the interface configuration mode.
- C. It remains in err-disabled state until the errdisable recovery cause failed-port-state command is entered in the global configuration mode.
- D. It remains in err-disabled state until the no shutdown command is entered in the interface configuration mode.
Answer: B
Explanation:
Explanation
NEW QUESTION # 98 
Refer to the exhibit. An engineer is reaching network 172.16.10.0/24 via the R1-R2-R4 path. Which configuration forces the traffic to fake a path of R1-R3-R4?
- A.

- B.

- C.

- D.

Answer: D
Explanation:
The configuration provided in the OCR text shows the use of a route map named RM_LOCAL_PREF to set the local preference for BGP routes received from the neighbor 13.13.13.3. By setting a higher local preference, the BGP best path selection process will prefer routes with a higher local preference value.
Therefore, to force traffic to take the path R1-R3-R4, the local preference for routes received from R3 should be increased, making them more preferred than the current path via R2.
NEW QUESTION # 99
Which three resources must the hypervisor make available to the virtual machines? (Choose three)
- A. processor
- B. memory
- C. bandwidth
- D. secure access
- E. IP address
- F. storage
Answer: B,C,F
NEW QUESTION # 100
......
What Are the Topics Tested in Cisco ENCOR?
If you want to get the passing score in 350-401 exam, you will need to develop advanced skills in the following topics:
- Network Assurance
- Automation
- Security
The first topic includes seven subtopics. Candidates should understand the difference between various design principles that are related to enterprise networks. Therefore, they will work with concepts such as Tier 2, Tier 3, and Fabric Capacity planning. Also, they will become skilled in handling high availability techniques such as FHRP, SSO, and redundancy. This topic also teaches exam-takers how to analyze WLAN deployment design principles and differentiate on-premises and cloud infrastructure deployments concepts. In addition, they should understand how to explain the Cisco SD-Acces and SD-WAN solution principles and describe concepts related to wired and wireless QoS. Finally, software and hardware switching mechanisms are included in the syllabus as well.
Within the Virtualization domain, candidates will learn different technologies for device virtualization. They will be exposed to concepts like Hypervisor types 1 and 2, virtual machines, and switching. Also, they have to be proficient in configuring and verifying data path virtualization technologies. In this section, they will get a deep-understanding of VRF, GRE, and IPsec tunneling notions. Besides, they will understand how network virtualization concepts such as LISP and VXLAN work.
The third topic is the most important in the overall exam's questions. It concentrates on giving candidates full details of Layer 2 and Layer 3 concepts. Applicants should also know how to troubleshoot, manage, and configure them properly using different tools and features. Also, they will go through Wireless-related concepts and become knowledgeable in the main principles and AP modes, Layer 1 concepts, or antenna types. Plus, they will discover which are the best techniques to troubleshoot WLAN configuration and wireless client connectivity issues. IP services management and deployment is another subtopic included here. Exam-takers will learn how to configure and verify NAP/PAT tools as well as configure multicast and first-hop redundancy protocols.
The fourth section talks about how to properly diagnose network problems. Candidates will learn more about debugs, conditional debugs, traceroute, and ping. They will also become skilled in configuring and verifying device monitoring, NetFlow, Flexible NetFlow, SPAN/RSPAN/ERSPAN, and IPSLA. Also, they will describe Cisco DNA Center workflows that enable them to configure, monitor, configure, and manage networks.
Within the Security domain, individuals will discover how device access controls work. They will learn more about password and line protection, as well as how to use AAA for authorization and authentication. Infrastructure security features configuration and their verification are also included here. Another subtopic handled is related to the REST API security and wireless security. Exam-takers should also know the components of network security design.
The final topic covers automation. It is essential that candidates understand how to interpret basic Python scripts and components. They will develop deep knowledge on how to construct a valid JSON encoded file, understand high-level principles and benefits of YANG and APIs for Cisco DNA Center and vManage. They will also be exposed to the topics like interpreting the response codes of REST API, EEM applet, and understand how to compare agent and agentless orchestration tools to configure, troubleshoot, and manage different network solutions.
Pass Cisco 350-401 exam Dumps 100 Pass Guarantee With Latest Demo: https://www.practicevce.com/Cisco/350-401-practice-exam-dumps.html
The 350-401 PDF Dumps Greatest for the Cisco Exam Study Guide!: https://drive.google.com/open?id=1MAZzkyV0Nzi0m4Bku4SSwMxNOK3R0LRl