2021 Valid NCP-5.15 test answers & Nutanix Exam PDF
Free Nutanix NCP-5.15 Exam Questions & Answer from Training Expert PracticeVCE
Introduction to Nutanix NCP 5.15
The 5.15 publication of the examination indicated the removal of 5.10. On September 15, 2020, the Nutanix NCP 5.10 exam will cease to be offered. On the other hand, you should only be confident that your scheduled date is before September 15, 2020, as you review and prepare for this edition of the test or that you are required to reset or move to a test at 5.15.
Different respectable organizations make massive efforts worldwide for the NCP-5.15 course. Nutanix is a well-known organization with tremendous technology investments. Nutanix has launched certifications Nutanix Certified Specialist that concentrates on a particular technology field. 5.15 Exam Certificates have an important role to play in the procurement of the new Nutanix Accredited Technical Technological Innovations Nutanix Accredited
Nutanix University is offering a course of the Nutanix certification which is for professionals it is an exam for which registrations are open. The new name of the exam is introduced because it covers different types of Nutanix technologies. It also highlights the different types of skills that will be used for earning after the certification of the course.
Retake Policies of Nutanix NCP-5.15
If an applicant fails an evaluation on the first try, two further attempts are permitted. Between attempts, there is a waiting time of seven days. These are compensated for separately as in the first attempt, and Nutanix advises giving ample time to be adequately trained to optimize the chances of success. Note: After three tries, you will not be able to take the 60 days examination after which you can send an e-mail to University. Nutanix advises that you use the time to evaluate this guide and its relevant sources closely and/or take the training prescribed.
NEW QUESTION 29
An administrator wants to configure Near Sync an AOS 5.15 implementations. The Cluster has the following characteristic
1) 2 nodes at both the primary and remote site
2) 60 TB of storage on each node
3) 1.9 TB SSD disks in each node
4) 8 VMs per protection domain
5) A mix of ESXi and AHV hypervisor
What three steps would need to be taken successfully enable Near Sync? (Choose Three)
- A. Increase the number of nodes at both sites to a minimum of three
- B. Reduce the amount of storage on each node to more than 40 TB
- C. Increase the amount of VMs in each protection domain to at least 10
- D. Use all AHV or all ESXi hypervisor in the implementations
- E. Reduce the SSD disks type 2 no more than 1 TB
Answer: A,C,D
NEW QUESTION 30
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 31
How many Prism Central instances are required to deploy Leap:'
- A. One per AHV cluster
- B. One per availability zone
- C. One per customer environment
- D. One per physical site
Answer: B
NEW QUESTION 32
Which three upgrades should an administrator be able to perform using Lifecycle Management? (Choose Three)
- A. BIOS
- B. HBA Firmware
- C. Hypervisor
- D. BMC
- E. AOS
Answer: B,D,E
Explanation:
Reference: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LMgICAW
NEW QUESTION 33
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 34
An administrator is managing a highly active SQL workload that is writing I/Os in 2 MB chunks to a vDisk. The administrator wants to optimize capacity setting for the computer.
Which storage optimization technology should the administration select to meet these requirement?
- A. Cache Deduplication
- B. Capacity Deduplication
- C. Erasure Coding
- D. Compression
Answer: D
NEW QUESTION 35
A configuration is single domain, single forest, and does not use SSL.
Which port number should be used to configure LDAP?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 36
Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?
- A. Syslog
- B. Email Digest
- C. Individual Alerts
- D. SNMP
Answer: B
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Prism_Central_Guide-Acr_v4_6:mul_alerts_manag Prism Central allows you to configure the alert messages sent by Prism Central. To configure alert settings, reporting rules, and message templates, do the following:
Note: Alert emails sent by Prism Central are in addition to any alert emails you might have configured on individual clusters through the Prism web console. You will receive email from both entities in this case.
Prism Central alert emailing is not enabled by default; you must explicitly enable it and specify the recipients (Nutanix customer support and/or supplied email addresses).
* Do one of the following:
* In the gear icon pull-down list of the main menu, select Alert Email Configuration.
* In the Alerts dashboard, click the
The Alert Email Configuration window appears.
* Click the Settings tab and do the following:
* Enable Prism Central
* Check the Email Every box to send an email whenever the event occurs.
* Check the Email Daily Digest box to send a cumulative (24 hour) list of alerts once a day.
You can check one or both boxes. If neither box is checked, no alert emails are sent by Prism Central.
* Check the Nutanix Support box to send alert notification to Nutanix customer support.
* To send alert notifications to others, enter their email addresses in a comma separate list in the field below the Nutanix Support box.
* Click the Apply button to apply the changes and continue the configuration (or click the Save button to apply the changes and close the window).
The Connection Status section displays mail transport status information. In this example, an SMTP server is configured for mail service. Clicking the Details link opens the SMTP server settings window
NEW QUESTION 37
What policy would maximize throughput for the brO uplink of a host?
- A. Route based on ip hash
- B. Active-Active
- C. Active-Backup with MAC pinning
- D. Switch Dependent, Dynamic
Answer: B
NEW QUESTION 38
An administrator needs to ensure that resource are reserved so that all VMs are able to restart in the event of a host failure.
Which steps should the administrator take to ensure the cluster is configured and operating appropriately?
- A. On a Nutanix CVM, execute the command ncli cluster get-domain fault-tolerance-status type=node
- B. Under the gear icon, select Manage VM high Availability and check Enable HA Reservation
- C. Under the gear Icon, select Degraded Node Setting and confirm that no hosts are degraded.
- D. In the Prism Hardware Desktop, select each host and confirm that RF is set to 3 under Host details.
Answer: B
NEW QUESTION 39
What is the expected operation during node addition when the new node has a different AOS version?
- A. The entire cluster is upgraded to the latest one-click release.
- B. The node is added and a separate upgrade operation must be performed.
- C. The node is automatically re-imaged using the software currently running in the cluster.
- D. The addition fails and forces the administrator to image using standalone Foundation.
Answer: D
NEW QUESTION 40
An administrator sets the default session timeout for admin users in Prism Ul Settings.
What is the maximum timeout in minutes?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 41
Which two levels of encryption are supported in a Nutanix cluster running third-party hypervisor? (Choose two.)
- A. Cluster
- B. VM
- C. Node
- D. Container
Answer: A,D
NEW QUESTION 42
An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.
Which metrics should the administrator review in Prism Analysis Graphs?
- A. Cluster IO, Network, Database and App Server CPU
- B. Cluster CPU and Memory Only
- C. Cluster IO, CPU, Memory and Database and App Server CPU
- D. Cluster IO, CPU, Memory, Network, App Server CPU
Answer: C
NEW QUESTION 43
When creating a VM on an AHV cluster, how is the initial placement of the VM determined?
- A. Placement is determined by the host that holds the new_VM token at the time of VM creation
- B. The administrator right clicks on the desired host and selects Power on VM from the dropdown menu
- C. AHV uses a round robin algorithm, placing new VMs onto hosts based on the numerical order of their UUID
- D. The Acropolis Dynamic Scheduler selects a host which provides adequate resources for the VMs configuration
Answer: D
NEW QUESTION 44
Refer to the exhibit.
System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.
Where in Prism Element should the administrator change the frequency of checks and alerts?
- A. Alerts Dashboard > Manage Checks > Frequency
- B. Health Dashboard > Manage Checks > Schedule
- C. Alerts Dashboard > Manage Checks > Schedule
- D. Health Dashboard > Manage Crocks > Frequency
Answer: B
NEW QUESTION 45
An administrator installs Nutanix-specific PowerShell cmdlets. The cmdlets fail to run.
Which two requirements should the administrator verify first? (Choose two)
- A. .Net Framework 4.0 is installed
- B. Windows 2016 r2 or later is installed
- C. The cmdlets have the proper permissions
- D. PowerShell 2.0 or later is installed
- E. Python 2.7 or greater is installed
Answer: A,D
NEW QUESTION 46
through what interfaces is/are (anti-)affinity rules configured. (Choose three)
- A. affinity :prism
- B. affinity :cli
- C. anti-affinity :cli
- D. anti-affinity :prism
Answer: A,B,C
NEW QUESTION 47
Which Prism Dashboard should be used to collect CPU/Memory and Disk I/O statistics over time?
- A. Analysis
- B. Hardware
- C. Health
- D. Alerts
Answer: A
NEW QUESTION 48
An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application.
How should the administrator meet this requirement?
- A. Create two containers and reserve space for vDisks
- B. Create one container and set capacity reservation
- C. Create one container and enable compression
- D. Create two containers and reserve space for containers
Answer: C
NEW QUESTION 49
Users report that data mining workloads on a single node in a Nutanix cluster are slow.
Which method should the administrator use to determine what may be causing this issue?
- A. Monitor the cluster CPU and memory usage on the Prism home screen.
- B. Create an entity chart for the host and analyze its 10 bandwidth.
- C. Create an entity chart for the affected host and analyze CPU usage.
- D. Monitor a metric chart for VM memory usage and track each affected VM.
Answer: D
NEW QUESTION 50
When host affinity policies are enabled, how does this affect the AHV cluster?
- A. Host affinity rules do not affect any other aspects of the AHV cluster.
- B. Micro segmentation rules will not be applied to VMs with affinity policies set on them.
- C. The VM-host affinity cannot be applied on a cluster that has HA reservations configured.
- D. Metro Availability will no longer work as designed and will result in Split Brain.
Answer: A
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Prism-Central-Guide-Prism-v5_17:mul-ahv-affinity
NEW QUESTION 51
A catastrophic failure occurs at the primary data center. A protection domain has been set up. All required data has been replicated to an offsite DR location.
Which button should an administrator click on at the remote site's protection domain to bring up the replicated VMs?
- A. Activate
- B. Migrate
- C. Replicate
- D. Online
Answer: A
NEW QUESTION 52
An administrator cables all interfaces on a newly added AHV host and starts migrating VM to 4. Users report that network connections are much slower to the VMs after the migration.
What is a possible reason for this issue.?
- A. The network is slower because the host is further away.
- B. The host still has the default bond configuration.
- C. The CVM on the node has not fully joined
- D. The VMs do not use the same interfaces as the CVM.
Answer: B
NEW QUESTION 53
An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)
- A. Increase CPU utilization%
- B. Increase CPU ready%
- C. Increasing CPU counts will decrease memory utilization
- D. Increase memory utilization%
Answer: C,D
NEW QUESTION 54
......
Top Nutanix NCP-5.15 Courses Online: https://www.practicevce.com/Nutanix/NCP-5.15-practice-exam-dumps.html