Excellent NS0-175 Updated 2021 Dumps With 100% Exam Passing Guarantee
Best way to practice test for Network Appliance NS0-175
NEW QUESTION 83
Which port type would you configure when you connect a chassis to the Fabric Interconnects?
- A. server ports
- B. Fibre Channel storage ports
- C. Ethernet uplink ports
- D. appliance ports
Answer: A
NEW QUESTION 84
Which one of the following access methods will maintain boot messages across reboots?
- A. RSH
- B. SSH
- C. Console
- D. Telnet
Answer: C
NEW QUESTION 85
To open a Network Appliance support ticket, you must access ____ at the NOW site.
- A. Submit a support ticket
- B. Submit a BURT
- C. Submit a Case
- D. Submit a RMA
Answer: C
NEW QUESTION 86
An architect is attempting to confirm that all logical interfaces (LIFs) are properly planned with a new clustered Data ONTAP 8.3 implementation. The customer wants to provision NFS datastores across the cluster to allow client access.
In this scenario, which LIF role satisfies this requirement?
- A. data LIF
- B. cluster-management LIF
- C. cluster LIF
- D. intercluster LIF
Answer: A
NEW QUESTION 87
State whether the following statement is true or false. Disk ID is represented in x.y format, where x refers to the host adaptor and y refers to the disk ID number.
- A. True
- B. False
Answer: A
NEW QUESTION 88
Click the Exhibit button.
Referring to the exhibit, how many ports are currently configured for connectivity using FCoE?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 89
With Data ONTAP 8.2 or later, a two-node cluster has which two connections? (Choose two.)
- A. 4x connections for HA Pair storage failover
- B. 4x 10GbE Ethernet connections cross connected on each node for the Cluster interconnect
- C. 2x Infiniband connections cross connected on each node for the Cluster interconnect
- D. 2x 10GbE Ethernet connections cross connected on each node for the Cluster interconnect
- E. 2x connections for HA Pair storage failover
Answer: D,E
NEW QUESTION 90
State whether the following statement is true or false. The sysstat command allows the performance statistics to be viewed, which consists of the present CPU usage, the full amount of network I/O, and the amount of disk I/O.
- A. True
- B. False
Answer: A
NEW QUESTION 91
What is a NetApp storage system Ethernet port name?
- A. g0/1
- B. e0a
- C. eth0
- D. e0/1
Answer: B
NEW QUESTION 92
Your customer has a FlexPod solution with a 2-node switchless ONTAP system, Cisco Nexus 93108 switches, and Cisco UCS B-Series servers. The customer wants to expand to a 4-node ONTAP storage cluster.
Which configuration is valid for expansion?
- A. Add one Nexus 3232C switch for the cluster interconnect.
- B. Add two Nexus 3232C switches for the cluster interconnect.
- C. Use the existing Nexus 93108 switches for the cluster interconnect.
- D. Add two Nexus 93108 switches for the cluster interconnect.
Answer: B
NEW QUESTION 93
The backup/restore options in the Maintenance section of the Appliance Manager are used to backup and restore _____.
- A. log files only
- B. log files and configuration files
- C. configuration files only
- D. specified cached data
Answer: C
NEW QUESTION 94
What is a benefit of deploying ACI over the NX-OS-based architecture?
- A. ACI is an application-driven policy model.
- B. ACI improves bandwidth utilization.
- C. ACI supports multiple virtualization platforms.
- D. ACI provides application performance optimization.
Answer: D
NEW QUESTION 95
A FlexPod solution is being designed using Nexus 9000 series switches.
What are three Layer 2 high-availability features that are available in this scenario? (Choose three.)
- A. Unidirectional Link Detection (UDLD) protocol
- B. First Hop Redundancy Protocols
- C. Nonstop forwarding (NSF)
- D. IEEE 802.3ad link aggregation
- E. Spanning Tree Protocol (STP)
Answer: A,D,E
NEW QUESTION 96
You are configuring VMware ESXi to support QoS across the entire FlexPod environment.
Which MTU setting is required to accomplish this task?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 97
Which of the following syntaxes are used to receive extensive help definition for particular commands?
- A. command ?
- B. help [command]
- C. ?
- D. [command] help
Answer: B
NEW QUESTION 98
You are designing a new FlexPod-based data center and configuring Virtual Port Channels (vPC) to provide the highest bandwidth throughput, link, and device resiliency to each of your FlexPod systems.
In this scenario, which two statements are true? (Choose two.)
- A. vPCs are an industry standard supported by all vendors.
- B. vPCs allow a single device to use a port channel across two upstream switches.
- C. vPCs are required by the FCoE configuration.
- D. vPCs enable the use of the aggregate bandwidth.
Answer: A,B
NEW QUESTION 99
What is the traceroute command used for?
- A. display a list of active sockets for each protocol
- B. print the route packets take to a network host
- C. show the state of each interface
- D. report interface activity in Kbps
Answer: B
NEW QUESTION 100
Which of the following options best describes what the configure "Shared User Hosts" feature that is found under Appliance Manager's Setup > FTP > Caching Behavior is used for?
- A. FTP servers from which fetched objects will be cached and served without a user-specific key requirement in order to increase the caching efficiency
- B. a shared IP address that all requesting clients will use to circumvent any authentication or user-specific key requirements on the backend FTP servers
- C. a subset of FTP servers that will be accelerated by the NetCache appliance
- D. a subset of FTP servers that can be bound to a shared virtual IP address in order to increase overall caching efficiency
Answer: A
NEW QUESTION 101
All of the following are supported interface types EXCEPT _______.
- A. Gigabit Ethernet, fiber
- B. 10/100 Ethernet
- C. ATM
- D. Gigabit Ethernet, copper
Answer: C
NEW QUESTION 102
One of the below ACLs will OK the requests from Engineering groups to www.netapp.com, which one could it be?
- A. allow groupname "engineering" and server-name matches "\.netapp\.com$"
- B. allow group "engineering" and server-domain www.netapp.com
- C. allow groupname "engineering" and server-name www.netapp.com
- D. allow group "engineering" and server-name www.netapp.com
Answer: D
NEW QUESTION 103
Which two NetApp storage controllers would be used in a valid FlexPod Datacenter configuration? (Choose two.)
- A. NetApp E2800
- B. NetApp AFF A700
- C. NetApp FAS2700
- D. NetApp EF570
Answer: B,C
NEW QUESTION 104
Clustered Data ONTAP 8.1 or later provides what four storage efficiency features? (Choose four.)
- A. MetroCluster
- B. compression
- C. deduplication
- D. FlexClone
- E. transparent files
- F. thin provisioning
Answer: B,C,D,F
NEW QUESTION 105
Which hardware device should provide Fibre Channel services in a FlexPod design?
- A. Cisco Nexus 3000
- B. Cisco Nexus 5500
- C. NetApp FAS
- D. Cisco UCS 6248 Fabric Interconnect
Answer: B
NEW QUESTION 106
Refer to the exhibit.
What would be the correct configuration for the ports labeled?
- A. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vlan 35switchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
- B. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport access vlan 35int vfc15bind interface po15switchport trunk allowed vsan 45vsan databasevsan 45 interface vfc15
- C. vlan 35fcoe vsan 35int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint portchannel15switchport mode trunkswitchport trunk allowed vlan 35spanning-tree port type edge trunkint vfc15bind interface po15switchport trunk allowed vsan 35vsan databasevsan 35 interface vfc15
- D. int eth1/31-32channel-group 15 mode activeint po15switchport mode access vsan 45vsan databasevsan 45 interface po15
- E. int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
Answer: C
NEW QUESTION 107
......
Cisco and NetApp FlexPod Design Specialist Certification Sample Questions and Practice Exam: https://www.practicevce.com/NetworkAppliance/NS0-175-practice-exam-dumps.html