[Nov-2021] Pass HP HPE0-S54 Tests Engine pdf - All Free Dumps
Designing HPE Server Solutions Practice Tests 2021 | Pass HPE0-S54 with confidence!
NEW QUESTION 15
A customer wants to streamline firmware and driver management of their HPE Synergy nodes running VMware hypervisor.
They want to implement HPE Smart Update Tools (SUT). Which of the following options applies to the solution?
- A. HPE Support Pack for ProLiant (SPP) is uploaded to Composer and applied to the profile
- B. Each server must be booted to the SPP through iLO Console virtual media by the administrator
- C. ICsp coordinates firmware and driver updates
- D. All VMware updates and drivers are downloaded by HPE OneView
Answer: A
Explanation:
Explanation/Reference:
https://support.hpe.com/hpsc/doc/public/display?docId=c05355899
NEW QUESTION 16
What are features of the HPE Synergy Planning Tool? (Choose two.)
- A. It creates a REST configuration file based on configuration created
- B. It aids configuration of rack, Frames, compute, storage, fabric and power
- C. It runs on the Partner Ready Portal
- D. It recommends the best top-of-rack switch
- E. It provides estimated power consumption and weights of the solution
Answer: B,E
NEW QUESTION 17
A customer has an existing Hadoop installation built on DL380 Gen9 24SFF servers. You need to review their existing installation and provide recommendations on how to achieve their stated storage density goal of over
5PB per server cabinet.
Which HPE solution should you recommend?
- A. HPE DL580 Gen10
- B. HPE Apollo 6500
- C. HPE Apollo 4510
- D. HPE ML350 Gen10
Answer: C
NEW QUESTION 18
A customer needs to boot from PXE with IPv6 across the Gen10 servers. Which option must be enabled to use this feature?
- A. HPE Intelligent Provisioning with IPv6 DHCP
- B. Legacy One-Time boot menu
- C. UEFI Boot with IPv6 enabled
- D. UEFI Secure Boot
Answer: C
Explanation:
Explanation/Reference: https://support.hpe.com/hpsc/doc/public/display?docId=emr_na- a00028429en_us&docLocale=en_US
NEW QUESTION 19
A customer requires the ability to act rapidly on ideas by creating, consuming, and reconfiguring new solutions, experiences, and business models. Which HPE server platform best meets their needs?
- A. HPE SimpliVity 380
- B. HPE Synergy
- C. HPE ProLiant Rack Servers
- D. HPE BladeSystem C7000
Answer: C
Explanation:
Explanation/Reference: https://www.academia.edu/31078322/
HPE_ATP_Server_Solutions_V3_PD56931_326_Pages_PDF_Original_EPUB_174_Pages
NEW QUESTION 20
During a presentation on Synergy fabric technology, a customer states that they would not purchase Virtual Connect modules because they would be paying for Fibre Channel technology that they have no intention of using.
How should you handle this objection?
- A. Explain to the customer that HPE does not pass on the cost of including Fibre Channel support to the customer.
- B. Inform the customer that native Fibre Channel support is provided through an optional daughterboard.
- C. Explain to the customer that the only Fibre Channel support is through FCoE and does not add to the module cost.
- D. Inform the customer that native Fibre Channel support is an optional, licensed feature.
Answer: B
NEW QUESTION 21
A customer needs to maximize Hyper-V Live Migration performance. What technology will meet the customer's requirement?
- A. network virtualization using generic routing encapsulation (NVGRE)
- B. virtual extensible LAN(VXLAN)
- C. RDMA over Converged Ethernet (RoCE)
- D. Fibre Channel over Ethernet (FCoE)
Answer: C
NEW QUESTION 22
While installing a three frame Synergy solution, only two of the frames are identified during the discovery process.
What should you do to get resolution?
- A. Remove and re-insert the standby Composer
- B. Issue a refresh command to the enclosure
- C. Open the front panel of the Composer, and read the error message
- D. Validate Frame Link Module topology
Answer: D
NEW QUESTION 23
A customer is expanding their blade based infrastructure managed by HPE OneView with an HPE Synergy platform. The customer is familiar with HPE OneView and wants to know if the same management can be used to manage HPE Synergy platform.
How should you respond to this question?
- A. HPE Synergy can be managed by HPE Composer, which is running an embedded version of the HPE OneView
- B. HPE Synergy can be managed using HPE OneView as long as a separate, dedicated HPE OneView appliance is deployed for HPE Synergy management.
- C. HPE Synergy must be managed with HPE Systems Insight Manager
- D. HPE Synergy can be managed using the same HPE OneView instance that is used to manage HPE BladeSystem platform.
Answer: B
NEW QUESTION 24
The HPE 800W Flex Slot Platinum Plus Hot Plug Low Halogen Power Supply has a built-in Lithium Ion battery to provide backup power to which component?
- A. Workload Acceleration
- B. Load Reduced DIMMS
- C. Persistent Memory
- D. Smart Array Flash cache
Answer: C
NEW QUESTION 25
Match the use case to the management component they should use.
Answer:
Explanation:
Explanation
HPE Apollo Platform Manager - A customer needs to control power on individual Apollo servers HPE Insight Cluster Management Utility - A customer needs to update BIOS settings in an Apollo Server HPE Intelligent Power Distribution Unit - A customer needs outlet level power control HPE Synergy Composer - A customer needs to create a server profile
NEW QUESTION 26
A customer wants to evaluate management software that will allow them to deploy firmware updates and monitor the health of their existing Gen9 and Gen10 servers.
What must you include in the PoC for the evalution?
- A. HPE OneView
- B. HPE One Configuration Advanced
- C. HPE Intelligent Provisioning
- D. HPE Insight Online
Answer: C
NEW QUESTION 27
A customer has 10 HPE BladeSystem enclosures managed by HPE OneView. They want to add three HPE Synergy frames.
What is a proper procedure to manage a new HPE Synergy installation?
- A. Use HPE Composer for HPE Synergy frames management
- B. Add all frames to the existing HPE OneView appliance
- C. Deploy HPE Global Dashboard for HPE Synergy management
- D. Deploy a dedicated HPE OneView appliance for HPE Synergy frames
Answer: C
NEW QUESTION 28
You are introducing Synergy to a new customer. Which tool can you use to demonstrate the physical components of the Synergy frame and how they connect?
- A. HPE PartSurfer
- B. HPE Synergy Planning Tool
- C. HPE Product Bulletin
- D. HPE Product Tour
Answer: B
NEW QUESTION 29
A customer needs a server that:
* supports their in-memory database
* is oriented towards business critical workloads
Which questions should you ask before you make a recommendation? (Choose two.)
- A. How important is it for the server to support ASHRAE A3/A4 standards?
- B. How will the datacenter provide backup power in the event of failure
- C. How many cores are required to optimize the application
- D. How much memory will the application require?
- E. How will the operating systems and application be deployed?
Answer: C,D
NEW QUESTION 30
A customer is considering installing a Synergy frame in an existing rack where their c7000 chassis is currently installed.
Which question should you ask to ensure the new frame will be supported in the rack?
- A. Are there any third party servers installed?
- B. How deep is the existing rack?
- C. How wide is the existing rack?
- D. Is there a UPS installed in the rack?
Answer: B
NEW QUESTION 31
A customer wants to implement HPE Synergy with 20Gb connectivity.
What should an architect emphasize during a meeting with this customer?
- A. 20Gb connectivity will require additional licenses applied to the downlink ports.
- B. SAS connectivity will be supported only on third fabric.
- C. A Composer must be installed in each frame.
- D. A maximum of 3 frames can be stacked together when 20 Gb connectivity is required.
Answer: A
NEW QUESTION 32
A financial customer has a remote office that requires a significant amount of computing resources, but has no local IT staff. They need simple and affordable management and disaster recovery of their site.
Which solution should you recommend to meet this customer's needs?
- A. HPE ConvergedSystem 300
- B. HPE SimpliVity 380
- C. HPE StoreOnce 5100
- D. HPE Serviceguard for Linux
Answer: B
NEW QUESTION 33
Which product automatically generates reports on collected lifecycle management events?
- A. HPE OneView
- B. Insight Online
- C. Insight Control
- D. HPE ONEView Global Dashboard
Answer: B
NEW QUESTION 34
Match each Synergy component with the description of the functionality it provides.
Answer:
Explanation:
Explanation
Box 1: Frame Link Module
Box 2: Image Streamer
Box 3: Virtual Connect SE 40Gb F8
Box 4: Composer
NEW QUESTION 35
A customer wants to use iLO Federation to manage firmware deployments with HPE SUM. Which options are included? (Select two.)
- A. Update all applicable firmware on HPE ProLiant servers through the iLO using offline deployment
- B. Automatically discover iLO Federation groups on the same management network
- C. Apply updates to all members of iLO Federation group with an iLO standard license
- D. iLO federation is leveraging ICsp functionality to update firmware
- E. Update the iLO firmware and system ROM offline through the iLO Federation group
Answer: A,C
Explanation:
Explanation/Reference: https://support.hpe.com/hpsc/doc/public/display?docId=c04774377
NEW QUESTION 36
A customer is considering deploying a significant number of HPE BladeSystem Gen10 servers with an HPE
3Par storage solution for a new cloud solution. You propose HPE OneView as the management platform.
Which HPE OneView feature should you emphasize during conversations with the customer?
- A. servers and storage firmware upgrades
- B. volume presentation from the 3Par and automated zoning
- C. operating system deployment through Image Streamer
- D. patch deployment for operating system and storage components
Answer: B
NEW QUESTION 37
A customer that runs a database server needs high speed access to the database files.
Which internal storage technology offers the best performance?
- A. SATA HDD
- B. SAS Nearline
- C. NVMe
- D. SAS HDD
Answer: C
NEW QUESTION 38
Refer to the exhibit.
You are installing three Synergy frames for a customer PoC in the configuration shown. The composer is unable to discover the frames.
What is the most likely cause of the problem?
- A. The management ring should be connected using the FLM link ports
- B. The management network should be connected to the top and bottom frames
- C. Composer 2 is in the wrong frame
- D. Another composer is needed Frame 3
Answer: D
NEW QUESTION 39
......
HP HPE0-S54 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 14 |
|
| Topic 15 |
|
| Topic 16 |
|
| Topic 17 |
|
| Topic 18 |
|
| Topic 19 |
|
Online Exam Practice Tests with detailed explanations!: https://www.practicevce.com/HP/HPE0-S54-practice-exam-dumps.html