Online Questions - Valid Practice To your HPE6-A73 Exam (Updated 102 Questions)
Practice To HPE6-A73 - Remarkable Practice On your Aruba Certified Switching Professional Exam Exam
The benefit in Obtaining the Hewlett Packard Enterprise Aruba Certified Switching Professional Exam
On the off chance that you need to upgrade your vocation as a systems administration proficient, you can help your odds and your chances with this affirmation. You can find network engineer occupations explicitly for the individuals who have abilities and information on Aruba organizations, just as show that you have an expansive information on systems administration. Find both lasting business and independent freedoms, just as maybe occupations with Aruba themselves.
In the event that you need to quit being utilized and view self as work all things being equal, you can find a colossal scope of independent freedoms. Field Engineer associates independent organization engineers with organizations searching for talented people with adaptable timetables. Associations need capable experts who can demonstrate their abilities and offer them magnificent worth when they have an undertaking or even need a drawn out responsibility.
Our HP HPE6-A73 dumps are a direct strategy to get familiar with about the test and about the association of the test. You can use it to get insisted and gather.
NEW QUESTION 17
Which protocols are used by NetEdit to interact with third-party devices9 {Select two )
- A. CDP
- B. Restful API
- C. telnet
- D. SNMP
- E. SSH
Answer: D,E
NEW QUESTION 18
Which concept is implemented using Aruba's dynamic segmentation?
- A. Colorless port
- B. Zero Touch Provisioning
- C. Root of trust
- D. Device fingerprinting
Answer: D
NEW QUESTION 19
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of
"Unknown".
What is the cause of this issue?
- A. The administrator does not have the appropriate credentials to interact with NAE
- B. The RESTful API has not been enabled on the AOS-CX switch
- C. A connectivity issue exists between NAE and the AOS-CX switch
- D. The number of scripts or agents has exceeded the hardware's capabilities
Answer: C
NEW QUESTION 20
Which AOS-CX feature is used to prevent head-on-line (HOL) blocking?
- A. VOQ
- B. VSX
- C. WFQ
- D. VSF
Answer: A
NEW QUESTION 21
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
- A. Enable change of authorization (CoA)
- B. Create and assign a local user role to the ports
- C. Set the ports to client-mode
- D. Define the server group cppm
Answer: A
NEW QUESTION 22
An administrator is managing a network comprised of AOS-CX switches deployed at the aggregation layer. The switches are paired in a VSX stack and run the OSPF routing protocol. The administrator is concerned about how long it takes for OSPF to converge when one of the VSX switches has to reboot.
What should the administrator to do speed up the OSPF convergence of the switch that is rebooting?
- A. Change the VSXISL link from an OSPF broadcast link point-to-point.
- B. Implement graceful restart on the VSX switches and their neighboring OSPF switches.
- C. Define non-backbone areas on the VSX switches as totally stubby areas.
- D. Decrease the VSX initial synchronization timer on the two VSX switches.
Answer: B
NEW QUESTION 23
A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS'CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?
- A. implement replay protection for AAA messages
- B. Speed up the AAA authentication process
- C. Define the account to implement change of authorization.
- D. Define the account to implement downloadable user roles
Answer: B
NEW QUESTION 24
The two PCs are located in VLAN 11 (10 1 11 0/24} Which example defines how to implement active gateway on the vsx core for VLAN 11?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: A
NEW QUESTION 25
An administrator of a company has concerns about upgrading the access layer switches. The users rely heavily on wireless and VoIP telephony. Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?
- A. Install AOS-CX 6300 or 6400 switches with always-on POE
- B. Implement VSF on the AOS-CX access switches
- C. Install the in-service software upgrade (ISSU) feature with clustering enabled
- D. Implement VSX on the AOS-CX access switches
Answer: B
NEW QUESTION 26
When comparing PIM-DM and PIM-SM, which multicast components are only found with PIM-SM in multicast routing? (Choose two.)
- A. Rendezvous point
- B. Bootstrap router
- C. Shortest path tree
- D. Designated router
- E. IGMP querier
Answer: A,C
NEW QUESTION 27
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch? (Choose two.)
- A. The encapsulation protocol used is VXLAN
- B. On the source AOS-CX switch, the destination specified is the administrator's desktop
- C. The encapsulation protocol used is GRE
- D. The encapsulation protocol is UDP
- E. On the source AOS-CX switch, the destination specified is the switch to which the administrator's desktop is connected
Answer: C,E
NEW QUESTION 28
Refer to the exhibit.
The ACL configuration defined on Core-1 is as follows:
if telnet was being used which device connection would he permitted and functional in both directions? (Select two }
- A. Client 1 to Client 3
- B. Client 1 to Client 2
- C. Server 2 to Client 2
- D. Client 3 to Client 2
- E. Server 1to Client 1
Answer: B,E
NEW QUESTION 29
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Client 1 to Client 3
- B. Client 1 to Client 2
- C. Server 2 to Client 2
- D. Client 3 to Client 2
- E. Server 1 to Client 1
Answer: B,E
NEW QUESTION 30
When implementing deficit weighted round robin queuing, what importance does the weight value have?
- A. Prioritizing latency-sensitive traffic
- B. Strict priority queue
- C. Percentage of interface bandwidth
- D. Queue priority in processing traffic
Answer: D
NEW QUESTION 31
How is voice traffic prioritized correctly on AOS-CX switches?
- A. By implementing voice VLANs
- B. By implementing weighted fair queueing (WFQ)
- C. By defining device profiles with QOS settings
- D. By placing it in the strict priority queue
Answer: A
NEW QUESTION 32
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement bidirectional forwarding detection (BFD)
- B. Implement graceful restart
- C. Implement route aggregation
- D. Reduce the hello and dead interval timers
Answer: C
NEW QUESTION 33
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 0 has 13 routes
- C. Core1 has received one LSA Type 5 from the ASBR
- D. Area 1 has 23 routes
Answer: D
NEW QUESTION 34
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 0 has 13 routes
- C. Core1 has received one LSA Type 5 from the ASBR
- D. Area 1 has 23 routes
Answer: D
NEW QUESTION 35
A network administrator is managing a network that deploys a multicast service. The administrator has multiple streams successfully being routed by PIM-DM in the network. The administrator then adds a new stream with a destination address of 239.0.0.1. However, clients who have not joined the stream are receiving it.
What should the administrator do to fix this problem?
- A. Define the 239.0.0.1 stream on the PIM candidate bootstrap router
- B. Change the destination multicast address to 239.1.1.1
- C. Define the 239.0.0.1 stream on the rendezvous point (RP)
- D. Verify that IGMP is enabled between the switches connecting the multicast source and receivers
Answer: B
NEW QUESTION 36
A company has recently upgraded their campus switching infrastructure with AOS-CX switches. They have implemented 802.1X authentication on access ports where laptop and IOT devices typically connect. An administrator has noticed that for POE devices, the AOS-CX switch ports are delivering the maximum wattage to the port instead of what the device actually needs.
Concerned about this waste of electricity, what should the administrator implement to solve this problem?
- A. Enable AAA authentication to exempt LLDP and/or CDP information.
- B. Implement a classifier policy with the correct power definitions
- C. Globally enable the QoS trust setting for LLDP and/or CDP,
- D. Create device profiles with the correct power definitions.
Answer: D
NEW QUESTION 37
An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as pnmary and secondary The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?
- A. LACP was enabled in active mode on the VSX LAG
- B. The VSX LAG hash does not match the remote peer
- C. Local optimization was not enabled on the VSX LAG
- D. The VSX LAG interfaces are in layer-3 mode
Answer: B
NEW QUESTION 38
The company has just upgraded their access layer switches with AOS-CX switches and implemented an AAA solution with ClearPass. The company has become concerned about what actually connects to the user ports on the access layer switch, Therefore, the company is implementing 802.1X authentication on the AOS-CX switches. An administrator has globally enabled 802.1X, and has enabled it on all the access ports connected to user devices, including VoIP phones, security cameras, and wireless Aruba IAPs. Wireless users are complaining that they successfully authenticate to the IAPs; however, they do not have access to network resources. Previously, this worked before 802.1X was implemented on the AOS-CX switches.
What should the company do to solve this problem?
- A. Implement device-based mode on the lAP-connected AOS-CX switch ports.
- B. Implement local user roles and local forwarding on the AOS-CX switches.
- C. Implement downloadable user roles and user-based tunneling (UBT) on the AOS-CX switches.
- D. Implement AAA RADIUS change of authorization on the AOS-CX switches.
Answer: C
NEW QUESTION 39
Examine the attached exhibit.
The network administrator it trying to add a remote location as area 3 to the network shown in the diagram.
Based on Current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.
Which feature should the administrator implement to provide connectivity to the remote location?
- A. Not-so-study areas
- B. Bidirectional forward detection (BFD
- C. Virtual links
- D. OSPFv3
Answer: C
NEW QUESTION 40
Which statement is correct regarding ACLs and TCAM usage?
- A. Applying an ACL to a group of ports consumes the same resources as specific ACE entries
- B. Compression is automatically enabled for ASIC TCAMs on AOS-CX switches.
- C. Applying an ACL to a group of VLANs consumes the same resources as specific ACE entries
- D. Using object groups consumes the same resources as specific ACE entries.
Answer: A
NEW QUESTION 41
......
True HPE6-A73 Exam Extraordinary Practice For the Exam: https://www.practicevce.com/HP/HPE6-A73-practice-exam-dumps.html
Get 100% Passing Success With True HPE6-A73 Exam: https://drive.google.com/open?id=1cJSeZy6WKHwOZhVff7OMOWai6Re9xUXv