Pass Your VMware Specialist - vSAN 2021 5V0-22.21 Exam on Nov 10, 2022 with 77 Questions
5V0-22.21 Free Exam Study Guide! (Updated 77 Questions)
For getting more info about the VMware vSAN Specialist hit the link below
Official link to the VMware 5V0-22.21 Certification Exam
NEW QUESTION 38
When viewing the VMware Skyline Health: vSAN Object Health report, the vSAN administrator observes that the link "Repair Objects Immediately" is enabled.
What is the meaning of this message?
- A. Immediate action must be taken to effect object repair.
- B. One or more objects have become inaccessible.
- C. The repair delay timer has elapsed, and ^synchronization has begun.
- D. One or more objects have absent components.
Answer: C
NEW QUESTION 39
A vSAN administrator wants to install a patch on an existing vSAN cluster. The environment runs vSphere 7.0, and the patch contains ESXi 7.0 Update 1c. The vSAN administrator will use vSphere Lifecycle Manager images to add the patch to the proper image and apply it to the vSAN cluster.
Which action should be performed before patching the ESXi hosts in the vSAN cluster?
- A. Upgrade the vCenter Server.
- B. Upgrade the Platform Services Controller.
- C. Perform a disk format upgrade.
- D. Create a baseline instead of using images.
Answer: A
NEW QUESTION 40
A remote location was configured with Cloud Native Storage. When the administrator put the host in maintenance mode to perform monthly patching, the File Server Health check was triggered.
Which action, if any, should the administrator take to resolve the issue?
- A. Click the Repair Objects Immediately button in the VMware Skyline Health Checks.
- B. It will resolve after 60 seconds, so no action is necessary.
- C. Remove the host from maintenance mode, and put it back with Full Data Migration.
- D. Modify the repair delay timer to 75.
Answer: A
NEW QUESTION 41
A vSAN administrator was presented with 30 additional vSAN ReadyNodes to add to an existing vSAN cluster. There is only one administrator to complete this task.
What is the fastest approach?
- A. Use a Host Profile that was extracted from an existing host.
- B. Run vim-cmd to capture, and apply the configuration from an existing host.
- C. Launch Quickstart to Add Hosts to a vSAN Cluster
- D. Clone the ESXi boot partition to all new hosts, since the hardware is identical.
Answer: C
NEW QUESTION 42
A vSAN administrator is noticing that the objects resynchronizing in the cluster are taking longer than expected and wants to view the resynchronizing metrics.
Which performance category should the vSAN administrator open?
- A. Disks
- B. Resync Latency
- C. Host Network
- D. Backend
Answer: D
NEW QUESTION 43
A business unit requires proprietary data to be protected against a site failure while using the least amount of storage and the least amount of nodes. AN administrator plans to implement a vSAN Stretched Cluster with a RAID-5 policy.
What is the minimum number of data nodes across all sites in this vSAN Stretched Cluster configuration?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 44
An existing vSAN cluster has this specification:
Four ESXi hosts with all flash configuration
Each with two disk groups
Each disk group with one cache device and four capacity devices
There are five more device slots available
The CTO would like to provision new applications, and these will need more capacity and performance.
Which two methods may be used by the vSAN administrator to meet this goal? (Choose two.)
- A. Replacing all capacity devices by a larger device
- B. Adding one more disk group per host with the same configuration
- C. Adding an ESXi host with identical device configuration
- D. Replacing all cache devices by a larger device
- E. Adding faster cache devices
Answer: B,C
NEW QUESTION 45
An administrator has discovered that space utilized by VMs does not decrease after deleting files and folders within the VMs. The administrator needs to be able to reclaim this space.
Which action could the administrator take to accomplish this task?
- A. Reboot the VM to recreate the swap file.
- B. Set the Object Space Reservation rule to 100%.
- C. Disable Storage I/O Control for the vSAN cluster.
- D. Enable TRIM/UN MAP for the vSAN cluster.
Answer: D
NEW QUESTION 46
A vSAN administrator of a network isolated vSAN environment wants to upgrade the environment from the vSAN 7.0 to the vSAN 7.0 U1 using vLCM.
Which option, if any, should be used as a depot in this case?
- A. Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.
- B. It is not possible to use the vSphere Lifecycle Manager on a network isolated environment.
- C. Configure the vSphere Lifecycle Manager to download the updates from the VMware Depot using HTTPS.
- D. Configure the vSphere Lifecycle Manager to download the updates from an Online Depot.
Answer: C
NEW QUESTION 47
In a 2-node vSAN cluster, one node has recovered from failure with FTT=1 and RAID-1 storage policy.
Refer to the exhibit:
What is the total VMDK storage consumed?
- A. 133GB
- B. 150 GB
- C. 100GB
- D. 200GB
Answer: C
NEW QUESTION 48
A vSAN administrator has recently upgraded a vSAN cluster to 7.0 U1 and has enabled Capacity Reserve features to reduce the amount of capacity reserved for transient and rebuild operations.
Which scenario would prevent this feature from operating properly?
- A. The used space on vSAN datastore exceeds the suggested host rebuild threshold.
- B. The used space on vSAN datastore exceeds the suggested slack rebuild threshold.
- C. The physical disk has reached an 80% full reactive rebalance threshold.
- D. Underutilized space is above 25-30% of the total capacity threshold.
Answer: D
NEW QUESTION 49
A vSAN administrator was examining the status of Virtual Objects and found inaccessible objects that are occupying significant storage capacity.
Refer to the exhibit:
Which action is needed to restore the storage capacity?
- A. Evacuate data on affected node by using the Full Data Migration mode.
- B. Identity and remove the obsolete object.
- C. Restart the host, and obsolete objects will be removed on their own.
- D. Trigger a manual resync, and allow vSAN to heal the object.
Answer: D
NEW QUESTION 50
An Application Clustering Solution requires an in-guest attachable LUN which can be shared across two different VMs.
Which vSAN feature can meet this requirement?
- A. vSAN HCI Mesh
- B. vSAN Datastore Sharing
- C. vSAN Data Persistence
- D. vSAN iSCSI Target Service
Answer: B
NEW QUESTION 51
An organization wants to configure a new storage policy based on the following requirements:
Failures to tolerate = FTT 1/RAID-5 (Erasure Coding)
Number of disk stripes per object = 8
IOPS limit for object = 0
Object Space Reservation = Thin provisioning
Flash read cache reservation = 0%
Disable object checksum = No
Force provisioning = No
The administrator creates the policy using storage policy based management and assigns it to a 100GB virtual machine on a 4-node vSAN cluster to test the results of the new storage policy.
How many components will be created per host for the storage objects of the virtual machine on the vSAN datastore?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 52
A 100GB virtual disk object has this storage policy assigned to it:
Site disaster tolerance: None - standard cluster
Failures to Tolerate: 1 failure - RAID-1 (Mirroring)
Number of disk stripes per object: 3
What is the maximum amount of raw vSAN storage capacity consumed by this virtual disk?
- A. 300GB
- B. 100GB
- C. 600GB
- D. 200GB
Answer: B
NEW QUESTION 53
A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.
A 10GB NIC on the servers is experiencing issues, the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Addon.
Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?
- A. Remove the Vendor Addon from the vLCM image, and then manually install the network driver on the servers.
- B. Add an individual component to the vLCM image that has the updated NIC driver.
- C. Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver.
- D. Since server vendors release periodic server Vendor Addon updates, make sure the vLCM image is configured to use the most recent version of the vendor addon.
Answer: B
NEW QUESTION 54
An administrator has successfully deployed a new 3-node vSAN Cluster. Prior to deploying any production workloads on to the new cluster, the administrator must complete a number of Service Validation and Testing (SVT) checks.
The final check requires the administrator to pull out a disk from one of the vSAN hosts.
Which two outcomes will occur within the vSAN cluster following this action? (Choose two.)
- A. All components on the device will be marked as degraded.
- B. By default. vSAN will delay the rebuilding of affected components for 60 minutes.
- C. All components on the device will be marked as absent.
- D. By default. vSAN will start the rebuilding of affected components immediately.
- E. By default vSAN will delay the rebuilding of affected components for 30 minutes.
Answer: A,D
NEW QUESTION 55
A vSAN administrator is deploying multiple 2-node clusters to remote branch offices. The nodes already have an old vSphere 7.0 image, but the administrator would like to update the image and ensure consistency across all the nodes.
The administrator configured vLCM on the first vSAN cluster and exported the image.
Which format should the administrator choose?
- A. TXT File
- B. ISO Image
- C. ZIP File
- D. JSONFile
Answer: B
NEW QUESTION 56
Which option, if any, is the default option to enable Maintenance Mode on a vSAN host?
- A. Full data migration.
- B. Ensure accessibility.
- C. There is no default option. The administrator must select an option.
- D. No data migration.
Answer: C
NEW QUESTION 57
A site administrator has determined that the site needs to upgrade all vSAN clusters to 7.0 U1. The vSAN administrator wishes to complete the update in the shortest amount of time possible. All virtual machines are assigned a storage policy where the "Failures to tolerate" is set to one or higher.
Which strategy should be used to achieve this goal?
- A. Update only select, mission-critical clusters.
- B. Select the *No data migration" maintenance mode option.
- C. Disable de-duplication and compression prior to the upgrade.
- D. Perform a complete update, omitting the on-disk format update.
Answer: A
NEW QUESTION 58
An administrator will be performing a rolling upgrade of a vSAN cluster over the weekend. In preparation, the administrator runs the Data Migration Pre-Check.
Which two items are being checked? (Choose two.)
- A. DRS settings
- B. Object compliance and accessibility
- C. vSphere HA state
- D. Affinity rules
- E. Cluster capacity
Answer: B,E
NEW QUESTION 59
The cluster level backend IOPS performance graph shows a higher-than-average number of IOPS for back-end storage.
What is a possible reason for this situation?
- A. DRS is invoking multiple vMotion migrations.
- B. Data ^synchronization is in progress.
- C. Not enough capacity for slack space is on vSAN datastore.
- D. There is VM storage I/O traffic.
Answer: B
NEW QUESTION 60
A customer is running a number of compute-intensive application workloads on their existing 4-node vSAN cluster that has resulted in resource contention. To provide additional compute resources, the vSAN administrator has decided to deploy a new 4-node vSAN compute-only cluster so that a HCI Mesh can be configured.
Which three points would the vSAN administrator need to consider before using this configuration? (Choose three.)
- A. A storage policy of Erasure Coding with hi 1=1 would be supported.
- B. A storage policy of Erasure Coding with FTT=2 would be supported.
- C. A storage policy of Mirroring with FIT 1 would be supported.
- D. The storage policy must be based on the number of hosts within the server cluster.
- E. The storage policy is based on the total number of hosts across both client and server clusters.
- F. The storage policy must be based on the number of hosts within the client cluster.
Answer: A,C,D
NEW QUESTION 61
A vSAN administrator has been asked to encrypt all traffic for data and metadata across all hosts in a vSAN cluster.
Which action is necessary to achieve this level of encryption?
- A. Enable vSAN Data In-Transit encryption at the cluster level. No KMS is required.
- B. Enable vSAN Cluster level encryption via Storage Policy. No KMS is required.
- C. Deploy KMS server, and enable vSAN Data at Rest and In-Transit encryption at the host level.
- D. Deploy KMS server, and enable vSAN Data at Rest encryption at the cluster level.
Answer: A
NEW QUESTION 62
......
5V0-22.21 Dumps for VMware Specialist - vSAN 2021 Certified Exam Questions and Answer: https://www.practicevce.com/VMware/5V0-22.21-practice-exam-dumps.html
Realistic Verified 5V0-22.21 exam dumps Q&As - 5V0-22.21 Free Update: https://drive.google.com/open?id=1IP06LYd7U2X6MUBpl0iBCXKy1V0IWTg9