Real Exam Questions HPE0-J58 Dumps Exam Questions in here [Oct-2021]
Get Latest Oct-2021 Conduct effective penetration tests using HPE0-J58
NEW QUESTION 17
A customer has two HPE Nimble arrays that are replication partners. The replication schedule is set to every hour.
After replication completed at 1:00pm, the array at the primary site suffers a power failure.
Applications were failed over successfully by the administrators, and production continued on the secondary site array as designed.
At 3:00pm, the power was restored to the primary site array.
What does the administrator need to do first to restore services in the primary site?
- A. Create a new replication partnership from the primary array to the secondary array
- B. Perform a failback of the existing replication partnership to the primary array
- C. Perform handover from the secondary array to the primary array
- D. Create a new replication partnership from the secondary array to the primary array
Answer: C
NEW QUESTION 18
Refer to the Exhibit.
A customer with an existing HPE Nimble installation sends you the output shown. The administrator who initially set up the replication has left the company.
They ask you what the current RPO level for their replication is. How should you respond?
- A. They have an RPO of four minutes
- B. They have an RPO of two minutes
- C. They need to verify the RPO level from the host vc-ms-fileserver
- D. They need to send a screenshot of the volumes tab
Answer: A
NEW QUESTION 19
A customer is interested in using HPE InfoSight Cross-stack Analytics for VMware.
Where does the customer need to make the appropriate configuration changes to makes this active?
- A. HPE 3PAR SSMC
- B. VMware vCenter
- C. HPE InfoSight Portal
- D. HPE 3PAR Service Processor
Answer: C
NEW QUESTION 20
A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?
- A. Cluster Extension (CLX)
- B. Serviceguard Metrocluster
- C. Site Recovery Manager
- D. Peer Persistence
Answer: A
Explanation:
Explanation/Reference:
Reference: https://tdhpe.techdata.eu/Documents/TDAS-Integrated%20Systems/Technical%20White%
20Paper_HPE%20ConvergedSystem%20700.pdf?epslanguage=en
NEW QUESTION 21
A customer needs a data recovery solution for their HPE 3PAR array. They have the following requirements:
RPO needs to be within three hours
RTO needs to be within three hours
There is no need for offsite data archive
They will have a limited maintenance window
Which solution meets all of the customer needs?
- A. HPE StoreOnce
- B. HPE StoreAll
- C. HPE StoreEver
- D. HPE 3PAR StoreServ with RMC
Answer: D
NEW QUESTION 22
A customer has two data centers in a metropolitan area. The link between the data centers is IP-based and satisfies the bandwidth and latency requirements. They have the following requirements:
Transparently and automatically failover and fall back between sites
Provide block and file access
Block access must provide connectivity for fibre channel and iSCSi hosts
All-Flash storage solution
You plan to propose a design based on HPE 3PAR storage arrays.
What would be the most cost-effective model that meets the customer needs?
- A. HPE 3PAR 9450
- B. HPE 3PAR 8450
- C. HPE 3PAR 20450
- D. HPE 3PAR 20850
Answer: B
NEW QUESTION 23
A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV).
Which CLI command should you use to understand data reduction ratios?
- A. checkvv
- B. showvv
- C. convertvv
- D. tunevv
Answer: A
NEW QUESTION 24
A customer needs a data recovery solution for their HPE 3PAR array. They have the following requirements:
* RPO needs to be within three hours
* RTO needs to be within three hours
* There is no need for offsite data archive
* They will have a limited maintenance window
Which solution meets all of the customer needs?
- A. HPE StoreOnce
- B. HPE StoreAll
- C. HPE StoreEver
- D. HPE 3PAR StoreServ with RMC
Answer: D
NEW QUESTION 25
A customer has a pair of HPE 3PAR arrays with Synchronous Replication enabled. They need recommendations for deploying the Quorum Witness when implementing Peer Persistence.
What should you recommend to the customer?
- A. The Quorum Witness should be in the secondary data center, with IP connectivity to the HPE 3PAR there
- B. The Quorum Witness should be in a third data center, with IP connectivity to both HPE 3PARs
- C. The Quorum Witness should be in the primary data center, with FC connectivity to the HPE 3PAR there
- D. The Quorum Witness should be in a third data center, with FC connectivity to both HPE 3PARs
Answer: D
Explanation:
Explanation/Reference: https://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8914ENW.pdf
NEW QUESTION 26
You receive an error when attempting to utilize SAF Analyze to upload customer data that you have collected to develop reports for a new proposal. What must you do first to begin the process?
- A. Create a new opportunity
- B. Create a single .zip file of all data exports
- C. Export the data as .xml
- D. Create a gatekeeper on your SAF utility server
Answer: B
NEW QUESTION 27
A customer has a requirement to provide disaster recovery for an application. The application has an RPO of 30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer's specified requirements in the most cost effective manner?
- A. by using Synchronous Replication
- B. by using Synchronous Long Distance Mode
- C. by using Streaming Asynchronous replication with an interval of 15 mins
- D. by using Periodic Asynchronous Replication with an interval of 15 mins
Answer: A
NEW QUESTION 28
A customer has a requirement to provide disaster recovery for an application. The application has an RPO of
30 mins, with an RTO of 15 mins. How can HPE 3PAR Remote Copy help meet the customer's specified requirements in the most cost effective manner?
- A. by using Synchronous Replication
- B. by using Synchronous Long Distance Mode
- C. by using Streaming Asynchronous replication with an interval of 15 mins
- D. by using Periodic Asynchronous Replication with an interval of 15 mins
Answer: A
Explanation:
Explanation
NEW QUESTION 29
Refer to the exhibit, which reflects the Bill of Materials (BOM) configuration for one datacenter.
A customer needs a new storage solution of two HPE 3PAR 8440 arrays. The customer's environment consists of eight physical servers in each data center attached to the SAN and one StoreOnce 3540 system with two FC I/O cards. The distance between data centers is less than 75 meters.
What should you add the BOM to meet the customer needs?
- A. one HPE 3PAR StoreServ 8000 Direct Connect Cabling Option for Drive Enclosure for each HPE 3PAR
8440 - B. one HPE SN3000B SAN Switch 12-port Upgrade E-LTU per switch, appropriate number of SFPs and cables
- C. one HPR 3PAR StoreServ AC RPS Service Processor
- D. one HPE 25m Mini SAS High Density Active Optical Cable for each HPE 3PAR 8440
Answer: C
NEW QUESTION 30
A customer has a primary site with an HPE Nimble Storage array and a secondary site with another HPE Nimble Storage array. The customer had a planned power outage at their primary site, and now needs to switch back to the primary array.
Place the steps into the order they must be performed to switch back the primary array.
Answer:
Explanation:
NEW QUESTION 31
Click and drag the steps on the left into the appropriate order on the right to set up an HPE 3PAR array in InfoSight.
Answer:
Explanation:
NEW QUESTION 32
A customer has three 4-node HPE 3PAR arrays. Two of the arrays are deployed at a primary site, and the third array is deployed at a disaster recovery site. Both arrays at the primary site are replicated to the single array at the disaster recovery site.
All replication is asynchronous periodic. All arrays are utilizing 4 RCIP links for replication.
The customer needs to add a third array at the primary site. They would like to use the existing array at the disaster recovery site as a replication target for this additional array.
What must the architect consider to meet this customer requirement?
- A. Remote Copy fan-in ratios of greater than 2:1 are only supported with RCIP when using 10 Gb Ethernet links
- B. Asynchronous streaming replication must be used for Remote Copy fan-in ratios greater than 2:1
- C. A single pair of RCIP ports on one array can have a Remote Copy relationship with up to two other arrays
- D. Arrays involved in a Remote Copy relationship must have the same number of node pairs
Answer: C
NEW QUESTION 33
......
Authentic Best resources for HPE0-J58 Online Practice Exam: https://www.practicevce.com/HP/HPE0-J58-practice-exam-dumps.html
Get the superior quality HPE0-J58 Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1qVTZt9BD1OTvj-Qe6eRRliT9p2chjKHZ