Use the best ways of preparing for NS0-519 Exam Dumps with PracticeVCE Network Appliance NS0-519 dump PDF [2021]
Network Appliance NS0-519 exam candidates will surely pass the Exam if they consider the NS0-519 dumps learning material presented by PracticeVCE.
NEW QUESTION 17
You have a 2-node AFF A400 serving FC LUNs. You are asked to make an instant-writable copy of a LUN in a deduplicated volume. The writable copy must not take additional space.
In this scenario, which two ONTAP features would be used? (Choose two.)
- A. file clone
- B. clone split
- C. volume clone
- D. LUN move
Answer: A,C
NEW QUESTION 18
Click the Exhibit button.
Referring to the exhibit, which switch in the fabric is the principal switch?
- A. sw6
- B. sw5
- C. sw4
- D. sw10
Answer: A
NEW QUESTION 19
An ONTAP administrator is troubleshooting a fabric login issue with a client. The SVM in question uses both FC and NFS protocols.
In this scenario, what would be the least disruptive operation?
- A. Use ONTAP System Manager to disable and then re-enable the LIF port in the SVM.
- B. Reboot the Brocade switch.
- C. Use ONTAP System Manager to stop and then restart the SVM.
- D. Use the command line to stop and start the FCP service on the cluster.
Answer: B
NEW QUESTION 20
Click the Exhibit button.
A customer has a 4-node AFF A700 cluster that uses ONTAP 9.7. The customer's environment has the Emulex LP31004-M6 and Emulex LPe32002-M2 HBAs.
Referring to the exhibit, using the NVMe protocol, which two host operating systems would be supported? (Choose two.)
- A. SLES 15 64-bit
- B. Microsoft Windows Server 2012 R2
- C. SLES 12 SP3 64-bit
- D. RHEL 7.5 64-bit
Answer: A,C
NEW QUESTION 21
You are called to help with a new customer's SAN environment that consists of an 8-node AFF A700 cluster, Cisco MDS fabric switches, and Cisco UCS servers.
Which two tools would help you to assess the environment? (Choose two.)
- A. Active IQ OneCollect
- B. Brocade SAN Health
- C. Active IQ Upgrade Advisor
- D. NetApp ONTAP Mediator
Answer: A,C
NEW QUESTION 22
Click the Exhibit button.
Referring to the exhibit, which two configuration elements are required to configure an SVM to support NVMe on Red Hat Enterprise Linux? (Choose two.)
- A. Set the security style to Mixed (UNIX and NTFS).
- B. Set the security style to UNIX.
- C. In Data Protocols, choose both FC/FCoE and NVMe protocols.
- D. In Data Protocols, choose only the NVMe protocol.
Answer: B,C
NEW QUESTION 23
You are in the testing phase of a newly deployed NVMe over Fibre Channel (NVMe/FC) SAM environment using Asynchronous Namespace Access (ANA). You are unable to successfully fail over a workload.
In this scenario, which action should you perform?
- A. Verify that the host operating system version supports ANA.
- B. Verify that the NVMe/FC host utilities kit is installed for ANA.
- C. Verify that multi-initiator zoning is configured on the FC switches.
- D. Verify that the DM-Multipath driver is configured for ANA.
Answer: D
NEW QUESTION 24
You just finished installing and configuring a new NetApp AFF All SAN Array environment.
In this scenario, which two tools would you use to verify that the environment satisfies best practices? (Choose two.)
- A. Active IQ OneCollect
- B. Active IQ Config Advisor
- C. ONTAP System Manager
- D. Active IQ Unified Manager
Answer: B,D
NEW QUESTION 25
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the storage back-end subsystem.
In this scenario, which two actions satisfy the failure criteria? (Choose two.)
- A. Disable Snapshot policies.
- B. Pull an Ethernet cable from a Linux host.
- C. Pull an Ethernet cable from a storage port with a cluster LIF.
- D. Perform a storage controller failover.
Answer: C,D
NEW QUESTION 26
You have 20 hosts, each with a single connection to one FC target port of an ONTAP HA pair. Each initiator is configured to limit the number of SCSI commands to 64 for each initiator-target connection. You plan to add 20 more hosts with the same number of connections.
In this scenario, how should you configure the queue depth limit?
- A. The sum of all hosts' queue depths per each target port should be less than or equal to 2048.
- B. Each host's queue depth should be set to 128.
- C. The sum of all hosts' queue depths per each target port should be less than or equal to 4096.
- D. Each host's queue depth should be set to 64.
Answer: D
NEW QUESTION 27
Which two SAN components are inventoried by Active IQ OneCollect? (Choose two.)
- A. power supply
- B. storage controller
- C. FC switches
- D. fans
Answer: B,C
NEW QUESTION 28
Click the Exhibit button.
Referring to the exhibit, which step must be performed to make LUN lun0 available to hosts in igroup linux1?
- A. node-01 and node-02 must be removed from the list of reporting nodes.
- B. lun0 must be mapped to linux1.
- C. lun0 must be brought online.
- D. node-03 and node-04 must be added to the list of reporting nodes.
Answer: C
NEW QUESTION 29
What information should you document about your storage fabrics? (Choose two.)
- A. name service
- B. Inter-Switch Links (ISLs)
- C. igroup name
- D. zoning configuration
Answer: B,D
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, you need to reduce the number of paths from the host to the LUNs.
Which three would reduce the number of paths? (Choose three.)
- A. port sets
- B. switch zoning
- C. ALUA
- D. Selective LUN Map (SLM)
- E. Asymmetric Namespace Access (ANA)
Answer: A,B,D
NEW QUESTION 31
An administrator is asked to provide enhanced security measures to an iSCSI LUN using the Challenge Handshake Authentication Protocol (CHAP) with the iscsi security create command.
In this scenario, for which two objects should the administrator configure CHAP? (Choose two.)
- A. for the volume containing the iSCSI LUN
- B. for the iSCSI LUN
- C. for the initiator IQN or EUI
- D. for the target IQN or EUI
Answer: B,C
NEW QUESTION 32
You plan to use Foreign LUN Import (FLI) to migrate data from an older storage array to an ONTAP cluster. You have properly cabled the storage array and the NetApp nodes to your dual-fabric SAN.
Which two steps are required for this migration and cutover? (Choose two.)
- A. Add NetApp WWN target ports to the existing zones so that your hosts can access both storage arrays.
- B. Create two zones that contain the NetApp target ports and the host initiators ports, one for each fabric.
- C. Add NetApp WWN initiator ports to the existing zones.
- D. Create two zones that contain NetApp initiator ports and the source storage target ports, one for each fabric.
Answer: A,B
NEW QUESTION 33
Click the Exhibit button.
A customer is troubleshooting an AFF A700 2-node cluster that is running out of space. They need to add two additional shelves, one shelf to stack-1, and a shelf to stack-2.
Referring to the exhibit, how many cables are required?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 34
Click the Exhibit button.
Referring to the dual-fabric cabling diagram shown in the exhibit, which scenario explains why the customer's iSCSI host experienced a SAN outage with a LUN on Node 2?
- A. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included Node 1 and Node 2, and Node 1 went down.
- B. iSCSI LIFs were configured on Node 1 and Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and Switch 1 went down.
- C. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included all nodes, and Node 1 and Node 2 went down.
- D. iSCSI LIFs were configured on Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and the cable connecting the host to Switch 1 went bad.
Answer: C
NEW QUESTION 35
A customer has decided to repurpose a NetApp FC target card from an older system. After installing the card into the newer NetApp AFF, the system kernel panics on boot.
Which tool would you use determine the problem?
- A. Active IQ OneCollect
- B. Interoperability Matrix Tool (IMT)
- C. Hardware Universe (HWU)
- D. OnCommand Insight (OCI)
Answer: C
NEW QUESTION 36
......
Accurate & Verified Answers As Seen in the Real Exam here: https://www.practicevce.com/NetworkAppliance/NS0-519-practice-exam-dumps.html