2024 Valid HPE6-A75 FREE EXAM DUMPS QUESTIONS & ANSWERS
Free HPE6-A75 Exam Braindumps HP Pratice Exam
HP HPE6-A75 (Aruba Certified Edge Professional) Certification Exam is a highly sought-after certification for IT professionals who want to gain expertise in Aruba networking and security solutions. Aruba Certified Edge Professional Exam certification exam is designed for individuals who have advanced knowledge and skills in implementing and managing Aruba networking solutions in complex environments.
HP HPE6-A75 (Aruba Certified Edge Professional) certification exam is an advanced level certification that validates an individual’s skills and knowledge in the Aruba networking technology. It is designed for IT professionals who have experience with Aruba technologies and are looking to enhance their skills to work with Aruba’s edge infrastructure. HPE6-A75 exam covers a range of topics, including Aruba Mobile First Architecture, Layer 2 and Layer 3 technologies, and advanced topics such as Aruba ClearPass and Aruba AirWave. Aruba Certified Edge Professional Exam certification is essential for IT professionals looking to advance their careers and organizations looking to identify skilled professionals who can help them leverage the Aruba networking technology.
NEW QUESTION # 27
Refer to the exhibit.
An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?
- A. ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user's session after this time is up.
- B. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user's session will be terminated after 600 seconds.
- C. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user's session after 600 seconds.
- D. ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user's session after this time is up.
- E. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user's session after 600 seconds.
Answer: C
NEW QUESTION # 28
Refer to the exhibit.
Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?
- A. The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.
- B. After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.
- C. The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP-TLS authentication is performed.
- D. The device's onboard authorization request will be denied.
- E. The device will be disconnected from and reconnected to the network after Onboarding is completed.
Answer: E
NEW QUESTION # 29
Refer to the exhibit.
Based on the Enforcement Policy configuration, when a user with Role Engineer connects to the network and the posture token assigned is Unknown, which Enforcement Profile will be applied?
- A. Deny Access Profile
- B. RestrictedACL
- C. HR VLAN
- D. EMPLOYEE_VLAN
- E. Remote Employee ACL
Answer: A
NEW QUESTION # 30
Refer to the exhibit.
Controllers are configured m a cluster as shown in the exhibit. These are the network details.
- A Mobility Master (MM) manages the cluster.
- The cluster contains two controllers: Cl and C2.
- API and AP2 use C1 as their Active AP Anchor Controller (A-AAC) with
C2 as their Standby AAC (S-AAC).
- AP3 and AP4 use C2 as their A-AAC, with C1 as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A- UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
- B. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C1.
- C. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
- D. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
Answer: B
Explanation:
The user VLAN or AP group will not directly affect whether cluster is L2 or L3. Each MC will probe its VLANs and will only choose L3 if the VLAN config is mismatched or the MC itself is in a different VLAN itself. The cluster should be L2 thus the APs will retain A-AAC unless rebalance or failure. The user will do the same for the U-AAC.
NEW QUESTION # 31
What is a typical reason to implement MAC authentication on an AOS-Switch?
- A. to filter traffic at the edge, based on multiple criteria in the MAC header
- B. to control management access to the switch CLI based on device, as well as user credentials
- C. to provision switch ports to support devices such as IP phones or printers
- D. to enhance the security of an 802.1X solution
Answer: D
NEW QUESTION # 32
A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)
- A. The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.
- B. The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.
- C. A new Virtual IP address should be created for each NAD.
- D. Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.
- E. The NAD should be configured with the Virtual IP address for RADIUS authentications on the 802.1x network.
Answer: B,E
NEW QUESTION # 33
Refer to the exhibit.
Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?
- A. The device will be disconnected from the network after Onboarding so that an EAP-TLS authentication is not performed.
- B. The device will be disconnected after post-Onboarding EAP-TLS authentication, so a second EAP- TLS authentication is performed.
- C. After logging in on the Onboard web login page, the device will be disconnected form and reconnected to the network before Onboard begins.
- D. The device's onboard authorization request will be denied.
- E. The device will be disconnected from and reconnected to the network after Onboarding is completed.
Answer: E
NEW QUESTION # 34
Refer to the exhibit.
When configuring a Web Login Page in ClearPass Guest, the information shown is displayed. What is the Address field value 'securelogin.arubanetworks.com' used for?
- A. for ClearPass to send a TACACS+ request to the NAD
- B. for ClearPass to send a RADIUS request to the NAD
- C. for appending to the Web Login URL, before the page name
- D. for appending to the Web Login URL, after the page name.
- E. for the client to POST the user credentials to the NAD
Answer: E
NEW QUESTION # 35
in a VPN that uses certificate-based authentication, which component must be configured on the Mobility Master (MM) to allow a RAP to successfully connect to a Mobility Controller (MC)
- A. WLAN and new RAP group
- B. RAP whitelist
- C. RAP IPSec pre-shared key
- D. RAP VPN username and password
Answer: B
NEW QUESTION # 36
Refer to the exhibit.
A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch.
The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit.
Which issue could cause this output?
- A. The switch port is set for user mode 801. IX. but the RADIUS server is set for port mode.
- B. The administrator entered the wrong password for the test account.
- C. The RADIUS shared secret does not match on the switch and the server.
- D. The switch does not have a certificate tor port-access installed on the switch.
Answer: C
NEW QUESTION # 37
An administrator wants to use Airwave to manually add devices on the network. Where should the administrator perform this action?
- A. in Groups
- B. in Devices
- C. in Device Setup
- D. in AMP Setup
Answer: C
NEW QUESTION # 38
What are Operator Profiles used for?
- A. to enforce role based access control for Aruba Controllers
- B. to map AD attributes to admin privilege levels in ClearPass Guest
- C. to assign ClearPass roles to guest users
- D. to enforce role based access control for ClearPass Policy Manager admin users
- E. to enforce role based access control for ClearPass Guest Admin users
Answer: E
NEW QUESTION # 39
Which statement is true about the Endpoint Profiler? (Select two.)
- A. The Endpoint Profiler can only categorize laptops and desktops.
- B. Endpoint Profiler requires a profiling license.
- C. The Endpoint Profiler uses DHCP fingerprinting for device categorization.
- D. The Endpoint Profiler requires the Onboard license to be enabled.
- E. Data obtained from the Endpoint Profiler can be used in Enforcement Policy.
Answer: C,E
NEW QUESTION # 40
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?
- A. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
- B. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.
- C. Have the MultiZone APs initially boot from the standalone controller in the data zone.
- D. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.
Answer: A
NEW QUESTION # 41
An AOS-Switch has type of service disabled on it globally. The administrator enters:
AOS-Switch(config)# interface 1 qos trust device aruba-ap
What is the effect of this command?
- A. if interface connects to an Aruba AP, the switch marks all traffic received on the interface with a higher than default priority value
- B. if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings sent by the controller to classify traffic received on interface 1
- C. if interface 1 connects to an Aruba AP, it uses the incoming DSCP and a global DSCP map to prioritize traffic received on this interface
- D. if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings send by the controller to prioritize traffic sent on interface 1
Answer: D
NEW QUESTION # 42
What is true about clustering and AP connections to cluster members?
- A. AP load balancing is disabled by default.
- B. The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.
- C. The AP will always stay connected to the LMS IP address configured in the AP profile.
- D. During rebalancing, the active load is redistributed first.
Answer: A
NEW QUESTION # 43
What must an OSPF router do when it receives a link state update?
- A. It must participate in a new election for the Designated Router and Backup DR.
- B. It must initiate a graceful restart timer.
- C. It must re-establish adjacency with its Designated Router and Backup DR.
- D. It must run the shortest path first algorithm.
Answer: D
NEW QUESTION # 44
Refer to the exhibit.
Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue. The network administrator sees that both switches show this interface as up. The administrator sees the output shown in the exhibit on Switch-1.
What is a typical issue that could cause this output?
- A. a hardware issue, such as a broken cable
- B. mismatched IP addresses on the VLAN for the link
- C. asymmetric routing introduced by a routing configuration error
- D. an issue with queuing, caused by mismatched QoS settings
Answer: A
NEW QUESTION # 45
......
Prepare For Realistic HPE6-A75 Dumps PDF - 100% Passing Guarantee: https://www.practicevce.com/HP/HPE6-A75-practice-exam-dumps.html
Practice Test for HPE6-A75 Certification Real 2024 Mock Exam: https://drive.google.com/open?id=1kwHmHqd2t0d2R9u5H7MW9WxsBRpllZ1F