JNCIS-SP JN0-362 Real Exam Questions and Answers FREE Updated on Aug 30, 2021
JN0-362 Ultimate Study Guide - PracticeVCE
NEW QUESTION 36
What are two valid next-hop types that would be configured for a static route? (Choose two.)
- A. An IP address
- B. A MAC address
- C. An igress interface name
- D. An egress interface name
Answer: A,D
NEW QUESTION 37
Click the exhibit.
Customer 1 has experienced some hardware failures that erroneously transitioned some links into a forwarding state, as shown in the exhibit.
In this scenario, which STP feature set would solve this problem?
- A. Loop protection
- B. Root protection
- C. BPDU protection
- D. MAC movement protection
Answer: A
NEW QUESTION 38
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)
- A. The first address is complete and correct.
- B. The third address is not formatted correctly.
- C. The second address is incomplete and not correct.
- D. All three addresses are the same.
Answer: A,D
NEW QUESTION 39
Click the Exhibit button.
You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish. Referring to the exhibit, which statement correctly identifies the problem?
- A. R1 and R2 have the same router ID
- B. Hello and dead timers are not matching between R1 and R2
- C. R2 has a wrong area configured
- D. R1 does not have a router ID defined
Answer: A
NEW QUESTION 40
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)
- A. It creates and adds a new inner IP header with the remote destination device's IP address
- B. It modifies the source and destination addresses in the inner IP header
- C. It adds an outer IP header with the destination address of the remote tunnel endpoint
- D. It decrements the time-to-live (TTL) counter by one in the inner IP header
Answer: C,D
NEW QUESTION 41
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The local-address statement is required for the BGP session to establish correctly
- B. The multi-hop statement is required for the BGP session to establish correctly
- C. The configuration is for an internal BGP session
- D. The configuration is for an external BGP session
Answer: A,C
NEW QUESTION 42
Click the exhibit.
Referring to the exhibit, which configuration must be set on R2 to from a Level 1 IS-IS adjacency with R1?
- A. Set interfaces lo0 unit 0 family iso address 49.0001.3414.0010.0250.0000.0046.00
- B. Set interfaces lo0 unit 0 family iso address 49.0001.3415.0010.0250.0000.0046.00
- C. Set interfaces lo0 unit 0 family iso address 49.0002.3415.0010.0250.0000.0046.00
- D. Set interfaces lo0 unit 0 family iso address 49.0002.3414.0010.0250.0000.0046.00
Answer: B
NEW QUESTION 43
Click the Exhibit.
Referring to the configuration in the exhibit, which two statements are true? (Choose two.)
- A. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
- B. The next-hop 172.16.1.2 must be active in route table inet 3 for the route 192.168.5.0/24 to be active.
- C. The next-hop 172.16.1.2 must be part of an active route in route table inet 0 for route
192.168.5.0/24 to be active. - D. The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active
Answer: C,D
NEW QUESTION 44
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel?
(Choose two.)
- A. It creates and adds a new inner IP header with the remote destination device's IP address
- B. It modifies the source and destination addresses in the inner IP header
- C. It adds an outer IP header with the destination address of the remote tunnel endpoint
- D. It decrements the time-to-live (TTL) counter by one in the inner IP header
Answer: C,D
NEW QUESTION 45
Click the Exhibit button. Given the OSPF network topology shown in the exhibit, you would like to inject external (non- OSPF) routes into the network on Router D
Which two OSPF area types will support this configuration? (Choose two)
- A. not-so-stubby area
- B. non-backbone area
- C. stub area
- D. totally stubby area
Answer: A,B
NEW QUESTION 46
You notice that the RID of your router is being taken from the address of your management interface.
What could cause this scenario?
- A. The loopback address was configured under [edit routing-options].
- B. The loopback address was configured with a /32 address.
- C. The loopback address was not configured under [edit protocols ospf].
- D. A suitable loopback address was not configured on the router.
Answer: D
NEW QUESTION 47
Click the Exhibit.
Referring to the exhibit, what is the result of applying this policy?
- A. The 172.18.1.0/24 prefix will be redistributed into OSPF as an internal route.
- B. The 172.18.1.0/24 prefix will be redistributed into OSPF as an external route.
- C. The 172.18.1.1/32 prefix will be redistributed into OSPF as an internal route.
- D. The 172.18.1.1/32 prefix will be redistributed into OSPF as an external route.
Answer: B
NEW QUESTION 48
Which two functions are performed by the OSPF designated router? (Choose two.)
- A. It advertises link-state information to the AS
- B. It chooses the backup designated router
- C. It designates some routers as inactive when not needed
- D. It forms adjacencies with all the other OSPF routers on the link
Answer: A,D
NEW QUESTION 49
What are tree types of interfaces that can be used in an MX Series device when implementing a virtual switch routing instance? (Choose three.)
- A. Trunk interface
- B. GRE tunnel interface
- C. Logical tunnel interface
- D. Access interface
- E. Layer 2 logical interface
Answer: A,D,E
NEW QUESTION 50
You have been asked to provision a service provider's network to accommodate Layer 3 VPNs as defined in RFC 4364.Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)
- A. All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.
- B. All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
- C. All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.
- D. All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
- E. All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.
Answer: A,C,D
NEW QUESTION 51
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
- A. Nodes share a physical medium.
- B. Nodes can successfully transmit simultaneously.
- C. It consists of a single broadcast domain.
- D. Nodes use a step-up algorithm when collisions are detected.
Answer: A,C
NEW QUESTION 52
To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 53
Click the Exhibit button.
In the network shown in the exhibit, all switches are configured with the default STP root bridge priority, and Switch A has been selected as root. You recently added the older Switch D into the network as an access switch, and notice it has taken over as root.
Which configuration would solve this problem?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/ no-root-port-edit-protocols-stp.html
NEW QUESTION 54
Click the Exhibit button. Which two topologies shown in the exhibit could be implemented without a spanning-tree protocol? (Choose two.)
- A. mesh
- B. ring
- C. star
- D. tree
Answer: C,D
NEW QUESTION 55
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B.Which routes will be advertised from Router B to Router E?
- A. BGP routes learned from Routers A and C only
- B. BGP routes learned from Router D only
- C. BGP routes learned from Routers A, C, and D only
- D. BGP routes learned from Router A only
Answer: C
NEW QUESTION 56
......
Ultimate Guide to Prepare JN0-362 Certification Exam for JNCIS-SP: https://www.practicevce.com/Juniper/JN0-362-practice-exam-dumps.html