[Nov-2021] Free JN0-362 Exam Questions JN0-362 Actual Free Exam Questions
Verified JN0-362 dumps and 67 unique questions
How much JN0-362 Exam Cost
The price of the JN0-362 exam is $350 US-
NEW QUESTION 20
Click the Exhibit.
Referring to the exhibit, what is the result of applying this policy?
- A. The 172.18.1.0/24 prefix will be redistributed into OSPF as an internal route.
- B. The 172.18.1.1/32 prefix will be redistributed into OSPF as an internal route.
- C. The 172.18.1.0/24 prefix will be redistributed into OSPF as an external route.
- D. The 172.18.1.1/32 prefix will be redistributed into OSPF as an external route.
Answer: C
NEW QUESTION 21
Which two IP addresses are considered Martian addresses? (Choose two.)
- A. 192.168.0.0/8
- B. 0.0.0.0/8
- C. 169.254.0.0/16
- D. 240.0.0.0/4
Answer: B,D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/recognize-martian-addr- routing.html
NEW QUESTION 22
Click the Exhibit button.
Referring to the exhibit, if there is a connection failure between router1 and router2, how much time will pass before the devices declare the BFD session dead?
- A. 300 ms
- B. 600 ms
- C. 1200 ms
- D. 900 ms
Answer: D
NEW QUESTION 23
You want to make use of the nonstop active routing (NSR) feature.
Which complementary feature must also be enabled?
- A. graceful Routing Engine switchover
- B. IP anycast
- C. Virtual Router Redundancy Protocol
- D. graceful restart
Answer: A
NEW QUESTION 24
Which two values are used by an RSTP bridge to remove stale BPDU information? (Choose two.)
- A. Max Age
- B. Hello Time
- C. Message Age
- D. Forwarding Delay
Answer: A,C
NEW QUESTION 25
You have two MX Series devices connected together and configured for Layer 2 operations. The interface that connects the two routers must carry tagged and untagged traffic.
Which approach would meet this objective?
- A. Configure the interfaces as access ports with the voice VLAN option
- B. Configure the interfaces as access ports with the native VLAN option
- C. Configure the interfaces as trunk ports with the voice VLAN option
- D. Configure the interfaces as trunk ports with the native VLAN option
Answer: D
NEW QUESTION 26
Click the Exhibit button. You have two routers connected over a Gigabit Ethernet link as shown in the exhibit It is required that an IS-IS adjacency be established without the need for a designated intermediate system (DIS)
Which configuration statement entered on both routers will achieve this goal?
- A. set interface ge-0/0/2 unit 0 family iso point-to-point
- B. set interface ge-0/0/2 unit 0 family iso no-dis
- C. set protocols isis interface ge-0/0/2.0 point-to-point
- D. set protocols isis interface ge-0/0/2.0 no-dis
Answer: C
NEW QUESTION 27
You are adding nonforwarding route reflectors to your network. Which three actions ensure that VPN routes are advertised properly? (Choose three.)
- A. Add the route reflectors to the same IGP domain as their clients.
- B. Use rib-groups to add IGP routes to inet.3 and/or inet6.3 on the route reflectors.
- C. Use rib-groups to add VPN routes to inet.0 and/or inet6.0 on the route reflectors.
- D. Add MPLS LSPs between the route reflectors and their client routers.
- E. Add a static default route to inet.3 and/or inet6.3 on the route reflectors.
Answer: B,D,E
NEW QUESTION 28
Which two routing protocols make use of a designated router, or pseudo node, to represent a broadcast network? (Choose two.)
- A. OSPF
- B. MPLS
- C. IS-IS
- D. BGP
Answer: A,C
NEW QUESTION 29
You have been asked to provision a service provider's network to accommodate Layer 3 VPNs as defined in RFC 4364.Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)
- A. All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.
- B. All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
- C. All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.
- D. All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
- E. All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.
Answer: C,D,E
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. R1 is a backbone router
- B. R2 is an ABR
- C. R1 is an ABR
- D. R2 is an ASBR
Answer: B
NEW QUESTION 31
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B
Which routes will be advertised from Router B to Router D?
- A. BGP routes learned from Router E only
- B. BGP routes learned from Router A only
- C. BGP routes learned from Routers A and C only
- D. BGP routes learned from Routers A, C and E only
Answer: D
NEW QUESTION 32
You have been asked to identify what the contributing routes are for route 204.7.15/21.Which command will show this information?
- A. show route 204.7.15/21 exact summary
- B. show route 204.7.15/21
- C. show route 204.7.15/21 detail
- D. show route 204.7.15/21 extended
Answer: C
NEW QUESTION 33
You own a small company and need to assign IPv6 addresses to your routers. Because you want to follow the guidelines spelled out in RFC 3177, you want to design your network with the correct prefixes.Which prefix would your ISP likely allocate to your company?
- A. 48-bit prefix
- B. 47-bit prefix
- C. 64-bit prefix
- D. 128-bit prefix
Answer: A
NEW QUESTION 34
What are three label operations that an MPLS-enabled router performs? (Choose three.)
- A. push
- B. pop
- C. rewrite
- D. swap
- E. insert
Answer: A,B,D
NEW QUESTION 35
You are establishing RSVP LSPs through your MPLS-enabled network. You are asked to ensure that the LSPs will support end-to-end class-of-service handling.
Which statement is correct in this scenario?
- A. Configure entropy-label on the egress device.
- B. Configure ultimate-hop-popping on the egress device.
- C. Configure implicit-null on all MPLS-enabled devices.
- D. Configure explicit-null on all MPLS-enabled devices.
Answer: D
NEW QUESTION 36
Click the Exhibit button.
Both configuration hierarchies shown in the exhibit have been committed to your MX Series device. Which two statements are true in this scenario? (Choose two.)
- A. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5
- B. Traffic destined to 10.3.0.1 will use the R1-to-R6 LSP as a next hop
- C. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7
- D. Traffic destined to 10.3.0.1 will not use the R1-to-R6 LSP as a next hop
Answer: B,C
NEW QUESTION 37
Which statement is true about GRE encapsulation?
- A. The entire frame is encapsulated by GRE.
- B. Only the IP payload is encapsulated by GRE.
- C. The entire packet is encapsulated by GRE.
- D. Only the IP header is encapsulated by GRE.
Answer: D
NEW QUESTION 38
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface ge-1/0/0.0 can only form a single adjacency
- B. Interface xe-0/0/0.0 can only form a single adjacency
- C. Interface ge-3/0/0.0 has a default metric of 10
- D. Interface xe-0/0/0.0 has a default metric of 10
Answer: C
NEW QUESTION 39
Click the Exhibit button.
You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
Which additional configuration parameter must you add to your configuration?
- A. multipath
- B. type external
- C. type internal
- D. export <policy name>
Answer: C
NEW QUESTION 40
......
Latest 100% Passing Guarantee - Brilliant JN0-362 Exam Questions PDF: https://www.practicevce.com/Juniper/JN0-362-practice-exam-dumps.html