[Mar 29, 2022] 300-610 Exam Dumps 100% Same Q&A In Your Real Exam
300-610 Test Engine Dumps Training With 120 Questions
NEW QUESTION 23
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Updating
- B. Primary
- C. Secondary
- D. Initial
Answer: D
NEW QUESTION 24
An engineer is experiencing performance issues on a cisco UCS blade server. The B-series blade server contains four CPUs, most of which are idle. The engineer notices that the CPU is suffering from too many requests sent by the NIC. Additionally, the number of queues appears to be insufficient and only a single CPU is processing the network traffic. Which policy must be used to alleviate these issues?
- A. Dynamic vNIC connection
- B. LAN connectivity
- C. Ethernet adapter
- D. vNIC placement
Answer: C
Explanation:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter19.html Ethernet adapter policy is the only policy that is having configuration that is related to CPU.
NEW QUESTION 25
A cloud service provider is managing day-2 operations of over 200 blade servers installed in the Cisco UCS environment. This pool of network resources is providing virtual networks to their customers. To successfully operate this environment, frequent changes to vNICs and other operational policies are required across multiple UCS domains. The operations team must streamline these repetitive tasks. Which orchestration tool must be used to meet this requirement?
- A. Cisco DAN Center
- B. Cisco UCS Director
- C. Cisco ACI Multisite Orchestrator
- D. Cisco UCS Manager
Answer: C
NEW QUESTION 26
DRAG DROP
Drag and drop the technologies from the left onto the correct descriptions on the right.
Select and Place:
Answer:
Explanation:
Section: Storage Network Design
NEW QUESTION 27
A network engineer is designing a Cisco Hyperflex infrastructure. The Infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.
Which storage connectivity method must be used to meet these requirements?
- A. Internet Small Computer Systems Interface
- B. raw device mapping
- C. Fibre Channel over Ethernet
- D. server message block
Answer: B
Explanation:
Source is from Cisco Press Hyperconverged Infrastructure Data Centers: Demystifying HCI.
NEW QUESTION 28
Which technology enables Layer 2 extension between remote data center sites?
- A. OTV
- B. DMVPN
- C. FCIP
- D. GRE
Answer: A
Explanation:
Section: Network Design
Explanation/Reference: https://netcraftsmen.com/spanning-layer-2-between-data-centers/
NEW QUESTION 29
An engineer must configure an interface for managing and orchestrating a Cisco Nexus device. The interface must be operational if the data and control planes crash, support IPv4 and IPv6 addressing, and have been access to its own VRF instance. Which interface should be used to meet these requirements?
- A. management interface
- B. Physical interface
- C. lookup
- D. interface VLAN
Answer: A
NEW QUESTION 30
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Updating
- B. Primary
- C. Secondary
- D. Initial
Answer: D
NEW QUESTION 31
An engineer is expanding an existing ISCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used
{prefix}. 2019-01.com.acme.123:00. ftd0cb21.bcb389458389
Which addressing scheme was used in the environment?
- A. Fibre Channel ID
- B. ISCSI Qualified Name
- C. Extended Unique identifier
- D. Network Address Authority
Answer: B
NEW QUESTION 32
Refer to the exhibit.
A high-availability setup for iSCSI is designed with the host running ISCSI software. Each storage port on the MDS exports the same two Fibre Channel target ports with different ISCSI target names. In this design, how many ISCSI session are created from the host so that recovery occurs if any component fails?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_2/ciscsi.html
NEW QUESTION 33
What is the disadvantage of asynchronous storage replication as compared to synchronous storage replication in a disaster recovery design?
- A. specific backup requirements
- B. reduction in application performance
- C. potential data loss
- D. distance limitations
Answer: C
Explanation:
Section: Storage Network Design
Explanation/Reference:
Reference: https://www.evidian.com/products/high-availability-software-for-application-clustering/synchronous- replication-vs-asynchronous-replication/
NEW QUESTION 34
An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point. Which feature must be used to meet these requirement?
- A. Control group
- B. ARP filter
- C. Data group
- D. FHRP filter
Answer: D
Explanation:
Reference:
NEW QUESTION 35
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 36
What is a design consideration when implementing FSPF?
- A. FSPF runs only on F Ports.
- B. Routes are based on the distance vector protocol.
- C. FSPF runs on a per-chassis basis.
- D. Routes are based on the domain ID.
Answer: D
NEW QUESTION 37
A network engineer is designing a Cisco Hyperflex infrastructure. The infrastructure will be connected to an external SAN fiber channel array and must support Microsoft clustering.
Which storage connectivity method must be used to meet these requirements?
- A. Internet Small Computer Systems Interface
- B. raw device mapping
- C. Fibre Channel over Ethernet
- D. server message block
Answer: C
Explanation:
Reference:
HyperFlex_HX_DataPlatformSoftware/Network_External_Storage_Management_Guide/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0/ b_HyperFlex_Systems_Network_and_External_Storage_Management_Guide_3_0_chapter_010.html
NEW QUESTION 38
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Run the disable fips-mode command on each fabric interconnect.
- B. Run the connect local-management command on each fabric interconnect.
- C. Unplug the Layer 1 and Layer 2 interfaces between the devices.
- D. Erase the configuration of both fabric interconnects.
Answer: C
NEW QUESTION 39
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. FC end-host mode
- B. FC switching mode
- C. NPIV mode
- D. NPV mode
Answer: B
Explanation:
Explanation
Section: Storage Network Design
NEW QUESTION 40
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster?
(Choose two.)
- A. DRS
- B. VSS
- C. VDP
- D. FT
- E. HA
Answer: A,E
NEW QUESTION 41
An engineer needs an orchestration and monitoring tool that should be used for managing the storage networks and VXLAN fabrics. The tool should also allow support built-in dashboard and real-time health summary for managed devices. Which tool meets these requirements?
- A. Puppet
- B. Cisco DCNM
- C. Cisco Intersight
- D. Ansible
Answer: B
NEW QUESTION 42
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION 43
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION 44
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco Nexus Fabric Manager
- B. Cisco Data Center Network Manager
- C. Cisco Virtual Topology System
- D. Cisco CloudCenter
Answer: B
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/DCNM_OLH/SAN_Client/fmhelp/ fmc.html#34479
NEW QUESTION 45
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. FC end-host mode
- B. FC switching mode
- C. NPIV mode
- D. NPV mode
Answer: B
Explanation:
Section: Storage Network Design
NEW QUESTION 46
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 9000 bytes
- B. 2240 bytes
- C. 2000 bytes
- D. 2158 bytes
Answer: C
NEW QUESTION 47
......
300-610 Practice Test Pdf Exam Material: https://www.practicevce.com/Cisco/300-610-practice-exam-dumps.html
300-610 Questions Pass on Your First Attempt Dumps for CCNP Data Center Certified: https://drive.google.com/open?id=16v75eAMtzbBM0_AtcjnUFvlUDGqaY_ci