Best Quality Cisco 300-610 Exam Questions PracticeVCE Realistic Practice Exams [2021]
Critical Information To Designing Cisco Data Center Infrastructure Pass the First Time
NEW QUESTION 61
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 62
Which two methods mitigate congestion in a SAN network? (Choose two.)
- A. Configure the flow control for the FC to use R_RDY.
- B. Configure the port channel to enable individual buffer-to-buffer credits.
- C. Configure the port monitor to allow categorization of a specific device as slow.
- D. Use the port-monitor command to detect slow drain devices.
- E. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
Answer: C,D
Explanation:
Reference:
cisco_mds9000_interfaces_config_guide_8x/congestion_avoidance_isolation.html
NEW QUESTION 63
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 2240 bytes
- B. 9000 bytes
- C. 2158 bytes
- D. 2000 bytes
Answer: D
Explanation:
Section: Storage Network Design
NEW QUESTION 64
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION 65
Refer to the exhibit.
What must be the default gateway of the servers in EPG Web?
- A. subnet address of BD1
- B. NAT appliance
- C. subnet address of L3Out
- D. subnet address of BD2
Answer: B
NEW QUESTION 66
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION 67
Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)
- A. target server
- B. number of vHBAs
- C. ARP entries
- D. UUID assignment
- E. VXLAN membership
Answer: B,D
NEW QUESTION 68
Which two configurations allow for routing traffic between two VDCs? (Choose two.)
- A. Create VRF-aware software infrastructure interfaces.
- B. Cross-connect the ports between the VDCs.
- C. Create a policy map in the default VDC that routes traffic between the VDCs.
- D. Connect the VDCs to an external Layer 3 device.
- E. Create interfaces in the VDC that can be accessed by another VDC.
Answer: C,D
NEW QUESTION 69
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- B. NPV feature on the Cisco MDS Series.
- C. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- D. NPIV feature on the Cisco MDS Series
- E. end-host mode feature on the Cisco UCS Fabric Interconnects
Answer: B,D
NEW QUESTION 70
An engineer is designing a Cisco 7000 Series disaster recovery site using the data center interconnect solution to provide gateway redundancy and needs to ensure that devices use gateways in their own data centers. Which design approach should be used to accomplish this goal?
- A. vPC localized to Its own data center
- B. FHRP localized to its own data center
- C. STP localized to Its own data center
- D. CFS localized to Its own data center
Answer: B
NEW QUESTION 71
What is a design consideration when implementing FSPF?
- A. Routes are based on the distance vector protocol.
- B. FSPF runs on a per-chassis basis.
- C. FSPF runs only on F Ports.
- D. Routes are based on the domain ID.
Answer: D
NEW QUESTION 72
Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?
- A. VSS that has unified uplinks
- B. Ethernet and unified ports on the same port channel
- C. cross-connections with pinning
- D. vPC that has unified uplinks
Answer: D
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116188- configure-fcoe-00.html#anc11
NEW QUESTION 73
Which orchestration tool should be used for the management and analytics of servers across multiple sites?
- A. Cisco Intersight
- B. Cisco Data Center Network Manager
- C. Cisco Nexus Fabric Manager
- D. Cisco UCS Manager
Answer: A
NEW QUESTION 74
Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?
- A. service gateway
- B. border gateway
- C. border leaf
- D. service leaf
Answer: B
NEW QUESTION 75
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION 76
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION 77
An engineer is implementing a Cisco UCS environment. The system must aggregate all vNICs into a single policy and consistently enforce node disassociation across the cluster. Which two UCS policies meet these requirements? (Choose two.)
- A. firmware policy
- B. vNIC policy
- C. boot policy
- D. LAN connectivity policy
- E. scrub policy
Answer: B,D
NEW QUESTION 78
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- B. NPV feature on the Cisco MDS Series.
- C. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- D. NPIV feature on the Cisco MDS Series
- E. end-host mode feature on the Cisco UCS Fabric Interconnects
Answer: B,D
NEW QUESTION 79
A company owns a large-scale compute infrastructure that consists of over 1000 servers and virtual machines. The operational complexity continues to grow with additional policies and servers added to the environment. An infrastructure engineer is looking for an automation tool to reduce the operational complexity of configuring complex infrastructure. Because of the strict security requirements, the tool must be agentless, use the secure shell for transport, and be extendable using existing Python modules. Which tool meets these requirements?
- A. Ansible
- B. Saltstack
- C. NSO
- D. Puppet
Answer: A
NEW QUESTION 80
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION 81
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster? (Choose two.)
- A. FT
- B. VDP
- C. VSS
- D. HA
- E. DRS
Answer: D,E
NEW QUESTION 82
Which two automation requirements can be met by using Puppet? (Choose two.)
- A. Provide support for writing new modules in Python.
- B. Enable clients to pull changes to configuration files.
- C. Push configuration updates immediately to servers.
- D. Enable one-off infrastructure changes to be performed manually.
- E. Enable clients to pull changes without installing an agent.
Answer: B,C
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series- rack-servers/whitepaper_c11-740103.pdf
NEW QUESTION 83
......
300-610 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.practicevce.com/Cisco/300-610-practice-exam-dumps.html
Best Quality Cisco 300-610 Exam Questions: https://drive.google.com/open?id=10EejAihDVVFYCgz0XFNTOFafTgimGrwD